Cisco ASA Integration


Version	2.43.4 (View all)
Compatible Kibana version(s)	8.11.0 or higher 9.0.0 or higher
Supported Serverless project types What's this?	Security Observability
Subscription level What's this?	Basic
Level of support What's this?	Elastic

This integration is for Cisco ASA network device's logs. It includes the following datasets for receiving logs over syslog or read from a file:

log dataset: supports Cisco ASA firewall logs.

Logs

ASA

The log dataset collects the Cisco ASA firewall logs.

		{
    "@timestamp": "2018-10-10T12:34:56.000Z",
    "agent": {
        "ephemeral_id": "bb12e06f-beb2-4447-82ba-7dd497fe6283",
        "id": "6a762ace-ff7a-4a1f-9fc4-cae4c2122d76",
        "name": "docker-fleet-agent",
        "type": "filebeat",
        "version": "8.13.2"
    },
    "cisco": {
        "asa": {
            "destination_interface": "outside",
            "full_message": "Built dynamic TCP translation from inside:172.31.98.44/1772 to outside:192.168.98.44/8256",
            "source_interface": "inside"
        }
    },
    "data_stream": {
        "dataset": "cisco_asa.log",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "address": "192.168.98.44",
        "ip": "192.168.98.44",
        "port": 8256
    },
    "ecs": {
        "version": "8.17.0"
    },
    "elastic_agent": {
        "id": "6a762ace-ff7a-4a1f-9fc4-cae4c2122d76",
        "snapshot": false,
        "version": "8.13.2"
    },
    "event": {
        "action": "nat-slot",
        "agent_id_status": "verified",
        "category": [
            "network",
            "configuration"
        ],
        "code": "305011",
        "dataset": "cisco_asa.log",
        "ingested": "2024-04-23T19:53:14Z",
        "kind": "event",
        "original": "Oct 10 2018 12:34:56 localhost CiscoASA[999]: %ASA-6-305011: Built dynamic TCP translation from inside:172.31.98.44/1772 to outside:192.168.98.44/8256",
        "outcome": "success",
        "severity": 6,
        "timezone": "UTC",
        "type": [
            "creation"
        ]
    },
    "host": {
        "hostname": "localhost"
    },
    "input": {
        "type": "tcp"
    },
    "log": {
        "level": "informational",
        "source": {
            "address": "192.168.192.4:46208"
        }
    },
    "network": {
        "community_id": "1:5fapvb2/9FPSvoCspfD2WiW0NdQ=",
        "iana_number": "6",
        "transport": "tcp"
    },
    "observer": {
        "egress": {
            "interface": {
                "name": "outside"
            }
        },
        "hostname": "localhost",
        "ingress": {
            "interface": {
                "name": "inside"
            }
        },
        "product": "asa",
        "type": "firewall",
        "vendor": "Cisco"
    },
    "process": {
        "name": "CiscoASA",
        "pid": 999
    },
    "related": {
        "hosts": [
            "localhost"
        ],
        "ip": [
            "172.31.98.44",
            "192.168.98.44"
        ]
    },
    "source": {
        "address": "172.31.98.44",
        "ip": "172.31.98.44",
        "port": 1772
    },
    "tags": [
        "preserve_original_event",
        "keep_message",
        "cisco-asa",
        "forwarded"
    ]
}

	

Field	Description	Type
@timestamp	Date/time when the event originated. This is the date/time extracted from the event, typically representing when the event was generated by the source. If the event source has no original timestamp, this value is typically populated by the first time the event was received by the pipeline. Required field for all events.	date
cisco.asa.aaa_type	The AAA operation type. One of authentication, authorization, or accounting.	keyword
cisco.asa.assigned_ip	The IP address assigned to a VPN client successfully connecting	ip
cisco.asa.burst.avg_rate	The current average burst rate seen	keyword
cisco.asa.burst.configured_avg_rate	The current configured average burst rate allowed	keyword
cisco.asa.burst.configured_rate	The current configured burst rate	keyword
cisco.asa.burst.cumulative_count	The total count of burst rate hits since the object was created or cleared	keyword
cisco.asa.burst.current_rate	The current burst rate seen	keyword
cisco.asa.burst.id	The related rate ID for burst warnings	keyword
cisco.asa.burst.object	The related object for burst warnings	keyword
cisco.asa.command_line_arguments	The command line arguments logged by the local audit log	keyword
cisco.asa.connection_id	Unique identifier for a flow.	keyword
cisco.asa.connection_type	The VPN connection type	keyword
cisco.asa.connections_in_use	The number of connections in use.	long
cisco.asa.connections_most_used	The number of most used connections.	long
cisco.asa.dap_records	The assigned DAP records	keyword
cisco.asa.destination_interface	Destination interface for the flow or event.	keyword
cisco.asa.destination_user_security_group_tag	The Security Group Tag for the destination user. Security Group Tag are 16-bit identifiers used to represent logical group privilege.	long
cisco.asa.destination_user_security_group_tag_name	The name of Security Group Tag for the destination user.	keyword
cisco.asa.destination_username	Name of the user that is the destination for this event.	keyword
cisco.asa.device_type	The device type.	keyword
cisco.asa.full_message	The Cisco log message text.	keyword
cisco.asa.group_policy	The group policy name.	keyword
cisco.asa.icmp_code	ICMP code.	short
cisco.asa.icmp_type	ICMP type.	short
cisco.asa.interface_name	The interface name.	keyword
cisco.asa.mapped_destination_host		keyword
cisco.asa.mapped_destination_ip	The translated destination IP address.	ip
cisco.asa.mapped_destination_port	The translated destination port.	long
cisco.asa.mapped_source_host		keyword
cisco.asa.mapped_source_ip	The translated source IP address.	ip
cisco.asa.mapped_source_port	The translated source port.	long
cisco.asa.message	The message associated with SIP and Skinny VoIP events	keyword
cisco.asa.message_id	The Cisco ASA message identifier.	keyword
cisco.asa.message_repeats	The number of times the message has been repeated.	short
cisco.asa.original_iana_number	IANA Protocol Number of the original IP payload.	short
cisco.asa.peer_type	The peer type.	keyword
cisco.asa.pool_address	The pool address.	ip
cisco.asa.pool_name	The pool name.	keyword
cisco.asa.privilege.new	When a users privilege is changed this is the new value	keyword
cisco.asa.privilege.old	When a users privilege is changed this is the old value	keyword
cisco.asa.redundant_interface_name	The redundant interface name.	keyword
cisco.asa.rejection_reason	Reason for an AAA authentication rejection.	keyword
cisco.asa.rule_name	Name of the Access Control List rule that matched this event.	keyword
cisco.asa.security	Cisco FTD security event fields.	flattened
cisco.asa.session_id	The session id.	keyword
cisco.asa.session_type	Session type (for example, IPsec or UDP).	keyword
cisco.asa.source_interface	Source interface for the flow or event.	keyword
cisco.asa.source_user_security_group_tag	The Security Group Tag for the source user. Security Group Tag are 16-bit identifiers used to represent logical group privilege.	long
cisco.asa.source_user_security_group_tag_name	The name of Security Group Tag for the source user.	keyword
cisco.asa.source_username	Name of the user that is the source for this event.	keyword
cisco.asa.suffix	Optional suffix after %ASA identifier.	keyword
cisco.asa.termination_initiator	Interface name of the side that initiated the teardown	keyword
cisco.asa.termination_user	AAA name of user requesting termination	keyword
cisco.asa.threat_category	Category for the malware / botnet traffic. For example: virus, botnet, trojan, etc.	keyword
cisco.asa.threat_level	Threat level for malware / botnet traffic. One of very-low, low, moderate, high or very-high.	keyword
cisco.asa.trustpoint	The trustpoint name.	keyword
cisco.asa.tunnel_group	The tunnel group name.	keyword
cisco.asa.tunnel_type	SA type (remote access or L2L)	keyword
cisco.asa.username		keyword
cisco.asa.webvpn.group_name	The WebVPN group name the user belongs to	keyword
client.address	Some event client addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
client.domain	The domain name of the client system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
client.ip	IP address of the client (IPv4 or IPv6).	ip
client.port	Port of the client.	long
client.user.name	Short name or login of the user.	keyword
client.user.name.text	Multi-field of `client.user.name`.	match_only_text
cloud.account.id	The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.	keyword
cloud.availability_zone	Availability zone in which this host is running.	keyword
cloud.image.id	Image ID for the cloud instance.	keyword
cloud.instance.id	Instance ID of the host machine.	keyword
cloud.instance.name	Instance name of the host machine.	keyword
cloud.machine.type	Machine type of the host machine.	keyword
cloud.project.id	Name of the project in Google Cloud.	keyword
cloud.provider	Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.	keyword
cloud.region	Region in which this host is running.	keyword
container.id	Unique container id.	keyword
container.image.name	Name of the image the container was built on.	keyword
container.labels	Image labels.	object
container.name	Container name.	keyword
data_stream.dataset	Data stream dataset.	constant_keyword
data_stream.namespace	Data stream namespace.	constant_keyword
data_stream.type	Data stream type.	constant_keyword
destination.address	Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
destination.as.number	Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.	long
destination.as.organization.name	Organization name.	keyword
destination.as.organization.name.text	Multi-field of `destination.as.organization.name`.	match_only_text
destination.bytes	Bytes sent from the destination to the source.	long
destination.domain	The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
destination.geo.city_name	City name.	keyword
destination.geo.continent_code	Two-letter code representing continent's name.	keyword
destination.geo.continent_name	Name of the continent.	keyword
destination.geo.country_iso_code	Country ISO code.	keyword
destination.geo.country_name	Country name.	keyword
destination.geo.location	Longitude and latitude.	geo_point
destination.geo.name	User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.	keyword
destination.geo.postal_code	Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.	keyword
destination.geo.region_iso_code	Region ISO code.	keyword
destination.geo.region_name	Region name.	keyword
destination.geo.timezone	The time zone of the location, such as IANA time zone name.	keyword
destination.ip	IP address of the destination (IPv4 or IPv6).	ip
destination.nat.ip	Translated ip of destination based NAT sessions (e.g. internet to private DMZ) Typically used with load balancers, firewalls, or routers.	ip
destination.nat.port	Port the source session is translated to by NAT Device. Typically used with load balancers, firewalls, or routers.	long
destination.port	Port of the destination.	long
destination.user.domain	Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name.	keyword
destination.user.email	User email address.	keyword
destination.user.name	Short name or login of the user.	keyword
destination.user.name.text	Multi-field of `destination.user.name`.	match_only_text
ecs.version	ECS version this event conforms to. `ecs.version` is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.	keyword
error.message	Error message.	match_only_text
event.category	This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. `event.category` represents the "big buckets" of ECS categories. For example, filtering on `event.category:process` yields all events relating to process activity. This field is closely related to `event.type`, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.	keyword
event.code	Identification code for this event, if one exists. Some event sources use event codes to identify messages unambiguously, regardless of message language or wording adjustments over time. An example of this is the Windows Event ID.	keyword
event.created	`event.created` contains the date/time when the event was first read by an agent, or by your pipeline. This field is distinct from `@timestamp` in that `@timestamp` typically contain the time extracted from the original event. In most situations, these two timestamps will be slightly different. The difference can be used to calculate the delay between your source generating an event, and the time when your agent first processed it. This can be used to monitor your agent's or pipeline's ability to keep up with your event source. In case the two timestamps are identical, `@timestamp` should be used.	date
event.dataset	Event dataset	constant_keyword
event.duration	Duration of the event in nanoseconds. If `event.start` and `event.end` are known this value should be the difference between the end and start time.	long
event.end	`event.end` contains the date when the event ended or when the activity was last observed.	date
event.ingested	Timestamp when an event arrived in the central data store. This is different from `@timestamp`, which is when the event originally occurred. It's also different from `event.created`, which is meant to capture the first time an agent saw the event. In normal conditions, assuming no tampering, the timestamps should chronologically look like this: `@timestamp` < `event.created` < `event.ingested`.	date
event.kind	This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. `event.kind` gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.	keyword
event.module	Event module	constant_keyword
event.provider	Source of the event. Event transports such as Syslog or the Windows Event Log typically mention the source of an event. It can be the name of the software that generated the event (e.g. Sysmon, httpd), or of a subsystem of the operating system (kernel, Microsoft-Windows-Security-Auditing).	keyword
event.severity	The numeric severity of the event according to your event source. What the different severity values mean can be different between sources and use cases. It's up to the implementer to make sure severities are consistent across events from the same source. The Syslog severity belongs in `log.syslog.severity.code`. `event.severity` is meant to represent the severity according to the event source (e.g. firewall, IDS). If the event source does not publish its own severity, you may optionally copy the `log.syslog.severity.code` to `event.severity`.	long
event.start	`event.start` contains the date when the event started or when the activity was first observed.	date
event.timezone	This field should be populated when the event's timestamp does not include timezone information already (e.g. default Syslog timestamps). It's optional otherwise. Acceptable timezone formats are: a canonical ID (e.g. "Europe/Amsterdam"), abbreviated (e.g. "EST") or an HH:mm differential (e.g. "-05:00").	keyword
event.type	This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. `event.type` represents a categorization "sub-bucket" that, when used along with the `event.category` field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.	keyword
file.path	Full path to the file, including the file name. It should include the drive letter, when appropriate.	keyword
file.path.text	Multi-field of `file.path`.	match_only_text
host.architecture	Operating system architecture.	keyword
host.containerized	If the host is a container.	boolean
host.domain	Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.	keyword
host.hostname	Hostname of the host. It normally contains what the `hostname` command returns on the host machine.	keyword
host.id	Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of `beat.name`.	keyword
host.ip	Host ip addresses.	ip
host.mac	Host mac addresses.	keyword
host.name	Name of the host. It can contain what `hostname` returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.	keyword
host.os.build	OS build information.	keyword
host.os.codename	OS codename, if any.	keyword
host.os.family	OS family (such as redhat, debian, freebsd, windows).	keyword
host.os.kernel	Operating system kernel version as a raw string.	keyword
host.os.name	Operating system name, without the version.	keyword
host.os.name.text	Multi-field of `host.os.name`.	text
host.os.platform	Operating system platform (such centos, ubuntu, windows).	keyword
host.os.version	Operating system version as a raw string.	keyword
host.type	Type of host. For Cloud providers this can be the machine type like `t2.medium`. If vm, this could be the container, for example, or other information meaningful in your environment.	keyword
input.type	Input type.	keyword
labels	Custom key/value pairs. Can be used to add meta information to events. Should not contain nested objects. All values are stored as keyword. Example: `docker` and `k8s` labels.	object
log.file.path	Full path to the log file this event came from, including the file name. It should include the drive letter, when appropriate. If the event wasn't read from a log file, do not populate this field.	keyword
log.level	Original log level of the log event. If the source of the event provides a log level or textual severity, this is the one that goes in `log.level`. If your source doesn't specify one, you may put your event transport's severity here (e.g. Syslog severity). Some examples are `warn`, `err`, `i`, `informational`.	keyword
log.offset	Offset of the entry in the log file.	long
log.source.address	Source address from which the log event was read / sent from.	keyword
log.syslog.facility.code	The Syslog numeric facility of the log event, if available. According to RFCs 5424 and 3164, this value should be an integer between 0 and 23.	long
log.syslog.priority	Syslog numeric priority of the event, if available. According to RFCs 5424 and 3164, the priority is 8 * facility + severity. This number is therefore expected to contain a value between 0 and 191.	long
log.syslog.severity.code	The Syslog numeric severity of the log event, if available. If the event source publishing via Syslog provides a different numeric severity value (e.g. firewall, IDS), your source's numeric severity should go to `event.severity`. If the event source does not specify a distinct severity, you can optionally copy the Syslog severity to `event.severity`.	long
message	For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message.	match_only_text
network.bytes	Total bytes transferred in both directions. If `source.bytes` and `destination.bytes` are known, `network.bytes` is their sum.	long
network.community_id	A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.	keyword
network.direction	Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.	keyword
network.iana_number	IANA Protocol Number (https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml). Standardized list of protocols. This aligns well with NetFlow and sFlow related logs which use the IANA Protocol Number.	keyword
network.inner	Network.inner fields are added in addition to network.vlan fields to describe the innermost VLAN when q-in-q VLAN tagging is present. Allowed fields include vlan.id and vlan.name. Inner vlan fields are typically used when sending traffic with multiple 802.1q encapsulations to a network sensor (e.g. Zeek, Wireshark.)	object
network.inner.vlan.id	VLAN ID as reported by the observer.	keyword
network.inner.vlan.name	Optional VLAN name as reported by the observer.	keyword
network.protocol	In the OSI Model this would be the Application Layer protocol. For example, `http`, `dns`, or `ssh`. The field value must be normalized to lowercase for querying.	keyword
network.transport	Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.	keyword
network.type	In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.	keyword
observer.egress.interface.name	Interface name as reported by the system.	keyword
observer.egress.zone	Network zone of outbound traffic as reported by the observer to categorize the destination area of egress traffic, e.g. Internal, External, DMZ, HR, Legal, etc.	keyword
observer.geo.city_name	City name.	keyword
observer.geo.continent_code	Two-letter code representing continent's name.	keyword
observer.geo.continent_name	Name of the continent.	keyword
observer.geo.country_iso_code	Country ISO code.	keyword
observer.geo.country_name	Country name.	keyword
observer.geo.location	Longitude and latitude.	geo_point
observer.geo.name	User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.	keyword
observer.geo.postal_code	Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.	keyword
observer.geo.region_iso_code	Region ISO code.	keyword
observer.geo.region_name	Region name.	keyword
observer.geo.timezone	The time zone of the location, such as IANA time zone name.	keyword
observer.hostname	Hostname of the observer.	keyword
observer.ingress.interface.name	Interface name as reported by the system.	keyword
observer.ingress.zone	Network zone of incoming traffic as reported by the observer to categorize the source area of ingress traffic. e.g. internal, External, DMZ, HR, Legal, etc.	keyword
observer.ip	IP addresses of the observer.	ip
observer.name	Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.	keyword
observer.product	The product name of the observer.	keyword
observer.type	The type of the observer the data is coming from. There is no predefined list of observer types. Some examples are `forwarder`, `firewall`, `ids`, `ips`, `proxy`, `poller`, `sensor`, `APM server`.	keyword
observer.vendor	Vendor name of the observer.	keyword
observer.version	Observer version.	keyword
process.name	Process name. Sometimes called program name or similar.	keyword
process.name.text	Multi-field of `process.name`.	match_only_text
process.pid	Process id.	long
related.hosts	All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.	keyword
related.ip	All of the IPs seen on your event.	ip
related.user	All the user names or other user identifiers seen on the event.	keyword
server.address	Some event server addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
server.domain	The domain name of the server system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
server.ip	IP address of the server (IPv4 or IPv6).	ip
server.port	Port of the server.	long
server.user.name	Short name or login of the user.	keyword
server.user.name.text	Multi-field of `server.user.name`.	match_only_text
source.address	Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
source.as.number	Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.	long
source.as.organization.name	Organization name.	keyword
source.as.organization.name.text	Multi-field of `source.as.organization.name`.	match_only_text
source.bytes	Bytes sent from the source to the destination.	long
source.domain	The domain name of the source system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
source.geo.city_name	City name.	keyword
source.geo.continent_code	Two-letter code representing continent's name.	keyword
source.geo.continent_name	Name of the continent.	keyword
source.geo.country_iso_code	Country ISO code.	keyword
source.geo.country_name	Country name.	keyword
source.geo.location	Longitude and latitude.	geo_point
source.geo.name	User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.	keyword
source.geo.postal_code	Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.	keyword
source.geo.region_iso_code	Region ISO code.	keyword
source.geo.region_name	Region name.	keyword
source.geo.timezone	The time zone of the location, such as IANA time zone name.	keyword
source.ip	IP address of the source (IPv4 or IPv6).	ip
source.nat.ip	Translated ip of source based NAT sessions (e.g. internal client to internet) Typically connections traversing load balancers, firewalls, or routers.	ip
source.nat.port	Translated port of source based NAT sessions. (e.g. internal client to internet) Typically used with load balancers, firewalls, or routers.	long
source.port	Port of the source.	long
source.user.domain	Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name.	keyword
source.user.email	User email address.	keyword
source.user.group.name	Name of the group.	keyword
source.user.name	Short name or login of the user.	keyword
source.user.name.text	Multi-field of `source.user.name`.	match_only_text
tags	List of keywords used to tag each event.	keyword
tls.version	Numeric part of the version parsed from the original string.	keyword
tls.version_protocol	Normalized lowercase protocol name parsed from original string.	keyword
url.domain	Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the `domain` field. If the URL contains a literal IPv6 address enclosed by `[` and `]` (IETF RFC 2732), the `[` and `]` characters should also be captured in the `domain` field.	keyword
url.extension	The field contains the file extension from the original request url, excluding the leading dot. The file extension is only set if it exists, as not every url has a file extension. The leading period must not be included. For example, the value must be "png", not ".png". Note that when the file name has multiple extensions (example.tar.gz), only the last one should be captured ("gz", not "tar.gz").	keyword
url.fragment	Portion of the url after the `#`, such as "top". The `#` is not part of the fragment.	keyword
url.full	If full URLs are important to your use case, they should be stored in `url.full`, whether this field is reconstructed or present in the event source.	wildcard
url.full.text	Multi-field of `url.full`.	match_only_text
url.original	Unmodified original url as seen in the event source. Note that in network monitoring, the observed URL may be a full URL, whereas in access logs, the URL is often just represented as a path. This field is meant to represent the URL as it was observed, complete or not.	wildcard
url.original.text	Multi-field of `url.original`.	match_only_text
url.password	Password of the request.	keyword
url.path	Path of the request, such as "/search".	wildcard
url.port	Port of the request, such as 443.	long
url.query	The query field describes the query string of the request, such as "q=elasticsearch". The `?` is excluded from the query string. If a URL contains no `?`, there is no query field. If there is a `?` but no query, the query field exists with an empty string. The `exists` query can be used to differentiate between the two cases.	keyword
url.registered_domain	The highest registered url domain, stripped of the subdomain. For example, the registered domain for "foo.example.com" is "example.com". This value can be determined precisely with a list like the public suffix list (https://publicsuffix.org). Trying to approximate this by simply taking the last two labels will not work well for TLDs such as "co.uk".	keyword
url.scheme	Scheme of the request, such as "https". Note: The `:` is not part of the scheme.	keyword
url.subdomain	The subdomain portion of a fully qualified domain name includes all of the names except the host name under the registered_domain. In a partially qualified domain, or if the the qualification level of the full name cannot be determined, subdomain contains all of the names below the registered domain. For example the subdomain portion of "www.east.mydomain.co.uk" is "east". If the domain has multiple levels of subdomain, such as "sub2.sub1.example.com", the subdomain field should contain "sub2.sub1", with no trailing period.	keyword
url.top_level_domain	The effective top level domain (eTLD), also known as the domain suffix, is the last part of the domain name. For example, the top level domain for example.com is "com". This value can be determined precisely with a list like the public suffix list (https://publicsuffix.org). Trying to approximate this by simply taking the last label will not work well for effective TLDs such as "co.uk".	keyword
url.username	Username of the request.	keyword
user.email	User email address.	keyword
user.name	Short name or login of the user.	keyword
user.name.text	Multi-field of `user.name`.	match_only_text
user_agent.original	Unparsed user_agent string.	keyword
user_agent.original.text	Multi-field of `user_agent.original`.	match_only_text

Changelog

Version	Details	Kibana version(s)
2.43.4	Bug fix (View pull request) Parse message repeat count from "message repeated X times" string.	8.11.0 or higher 9.0.0 or higher
2.43.3	Bug fix (View pull request) Allow masked usernames for 315011 messages.	8.11.0 or higher 9.0.0 or higher
2.43.2	Bug fix (View pull request) Handle another variation of message type 315011	8.11.0 or higher 9.0.0 or higher
2.43.1	Bug fix (View pull request) Update Cisco time for fraction-of-seconds support.	8.11.0 or higher 9.0.0 or higher
2.43.0	Enhancement (View pull request) Support stack version 9.0.	8.11.0 or higher 9.0.0 or higher
2.42.3	Bug fix (View pull request) Add proper parsing for previously unhandled message types	8.11.0 or higher
2.42.2	Bug fix (View pull request) Trim quotes from user.name field.	8.11.0 or higher
2.42.1	Bug fix (View pull request) Updated SSL description to be uniform and to include links to documentation.	8.11.0 or higher
2.42.0	Enhancement (View pull request) ECS version updated to 8.17.0.	8.11.0 or higher
2.41.1	Bug fix (View pull request) Fix issue with linking time zone mapping to agent config.	8.11.0 or higher
2.41.0	Enhancement (View pull request) Add advanced option for time zone mapping and support parsing extra timestamp in header.	8.11.0 or higher
2.40.0	Bug fix (View pull request) Set event.outcome to failure for all denied events.	8.11.0 or higher
2.39.1	Enhancement (View pull request) Handle variations of device name in event 434004.	8.11.0 or higher
2.39.0	Bug fix (View pull request) Fix event.outcome mapping for event IDs 106100 and 106102.	8.11.0 or higher
2.38.3	Bug fix (View pull request) Handles another variation of log message type 113040 that includes a Group and Terminating message.	8.11.0 or higher
2.38.2	Bug fix (View pull request) Add a check before a processor that consistently fails when invalid data transits the integration.	8.11.0 or higher
2.38.1	Bug fix (View pull request) Loosen a grok pattern to allow for IPs and hostnames	8.11.0 or higher
2.38.0	Enhancement (View pull request) Introduce destination.address to message IDs 725001, 725002, 725007, and 725016.	8.11.0 or higher
2.37.0	Enhancement (View pull request) Allow @custom pipeline access to event.original without setting preserve_original_event.	8.11.0 or higher
2.36.4	Bug fix (View pull request) Handle "Account has been locked out" reason parsing	8.7.1 or higher
2.36.3	Bug fix (View pull request) Parse empty user names in message IDs 113005, 716002, 713049	8.7.1 or higher
2.36.2	Bug fix (View pull request) Add pattern for 716059.	8.7.1 or higher
2.36.1	Bug fix (View pull request) Fix handling IPv4 and IPv6 for ids 721016 and 721018	8.7.1 or higher
2.36.0	Enhancement (View pull request) Add additional log types.	8.7.1 or higher
2.35.3	Bug fix (View pull request) Fix patterns for 113008, 725002.	8.7.1 or higher
2.35.2	Bug fix (View pull request) Loosen a grok pattern for a customer SDH.	8.7.1 or higher
2.35.1	Bug fix (View pull request) Extract user agent from 722055 logs to correct field.	8.7.1 or higher
2.35.0	Enhancement (View pull request) Add additional log types.	8.7.1 or higher
2.34.1	Enhancement (View pull request) Add support for spaces in group and user names.	8.7.1 or higher
2.34.0	Enhancement (View pull request) Improve ECS categorizations.	8.7.1 or higher
2.33.2	Bug fix (View pull request) Fix categorization of protocols.	8.7.1 or higher
2.33.1	Bug fix (View pull request) Allow apostrophes in usernames.	8.7.1 or higher
2.33.0	Enhancement (View pull request) Improve methods for applying ECS categorizations.	8.7.1 or higher
2.32.1	Bug fix (View pull request) Fix ingest pipeline regex warnings	8.7.1 or higher
2.32.0	Enhancement (View pull request) Update package spec to 3.0.3.	8.7.1 or higher
2.31.0	Enhancement (View pull request) Add message ids 722022, 722023.	8.7.1 or higher
2.30.1	Enhancement (View pull request) Changed owners	8.7.1 or higher
2.30.0	Enhancement (View pull request) Retain email address of source and destination user.	8.7.1 or higher
2.29.0	Bug fix (View pull request) Support spaces and special characters in usernames. Bug fix (View pull request) Add destination SGT-integer:SGT-name to 313005.	8.7.1 or higher
2.28.1	Bug fix (View pull request) Fix exclude_files pattern.	8.7.1 or higher
2.28.0	Enhancement (View pull request) ECS version updated to 8.11.0.	8.7.1 or higher
2.27.1	Bug fix (View pull request) Support usernames ending with "$". Bug fix (View pull request) Add "User was not found" as reason to 113015. Bug fix (View pull request) Allow source to be a domain or an IP inside 313005. Bug fix (View pull request) Create non-capturing groups for CISCO_USER GROK pattern	8.7.1 or higher
2.27.0	Enhancement (View pull request) Improve 'event.original' check to avoid errors if set.	8.7.1 or higher
2.26.1	Bug fix (View pull request) Accept SGT-integer:SGT-name as username Bug fix (View pull request) Allow usernames to end with "$" Bug fix (View pull request) Update network.inner to object as per ECS standard.	8.7.1 or higher
2.26.0	Enhancement (View pull request) Add support for 113015 events. Bug fix (View pull request) Accept "*****" as a valid username value.	8.7.1 or higher
2.25.3	Bug fix (View pull request) Fix field mapping for empty groups imported from ECS	8.7.1 or higher
2.25.2	Bug fix (View pull request) Fix the protocol field processing in 313005.	8.7.1 or higher
2.25.1	Bug fix (View pull request) Remove redundant regular expression quantifier.	8.7.1 or higher
2.25.0	Enhancement (View pull request) Update the package format_version to 3.0.0.	8.7.1 or higher
2.24.0	Enhancement (View pull request) Extend authenticaton rejection reasons that are accepted. Enhancement (View pull request) Retain the authenticaton rejection reason.	8.7.1 or higher
2.23.0	Enhancement (View pull request) Update package to ECS 8.10.0 and align ECS categorization fields.	8.7.1 or higher
2.22.0	Enhancement (View pull request) Add tags.yml file so that integration's dashboards and saved searches are tagged with "Security Solution" and displayed in the Security Solution UI.	8.7.1 or higher
2.21.0	Enhancement (View pull request) Update package-spec to 2.10.0.	8.7.1 or higher
2.20.4	Bug fix (View pull request) Add support for unspecified reason AAA user authenticaton rejection.	8.7.1 or higher
2.20.3	Bug fix (View pull request) Add missing geo field mappings	8.7.1 or higher
2.20.2	Bug fix (View pull request) Fix the processing of event 313005 when ports are missing. Bug fix (View pull request) Collect network.transport for events 722033 and 722034.	8.7.1 or higher
2.20.1	Bug fix (View pull request) Fix the handling of spaces in 113005 messages.	8.7.1 or higher
2.20.0	Enhancement (View pull request) Update package to ECS 8.9.0.	8.7.1 or higher
2.19.0	Enhancement (View pull request) Convert dashboard to lens.	8.7.1 or higher
2.18.0	Enhancement (View pull request) Ensure event.kind is correctly set for pipeline errors.	8.1.0 or higher
2.17.1	Bug fix (View pull request) Fix VPN event.action	8.1.0 or higher
2.17.0	Enhancement (View pull request) Update package to ECS 8.8.0.	8.1.0 or higher
2.16.0	Enhancement (View pull request) Support 722011, 722033 and 722034 messages. Bug fix (View pull request) Fix handling of 722037 and 722051 messages.	8.1.0 or higher
2.15.0	Enhancement (View pull request) Update package to ECS 8.7.0.	8.1.0 or higher
2.14.1	Enhancement (View pull request) Added categories and/or subcategories.	8.1.0 or higher
2.14.0	Enhancement (View pull request) Allow retention of a searchable log message.	8.1.0 or higher
2.13.2	Bug fix (View pull request) Support additional patterns in 113012, 113004, and 716039 messages	8.1.0 or higher
2.13.1	Bug fix (View pull request) Remove `ignore_failure` causing performance bottleneck	8.1.0 or higher
2.13.0	Enhancement (View pull request) Allow configuration of time zones.	8.1.0 or higher
2.12.1	Bug fix (View pull request) Interchange source, destination for messages 302013 & 302015 as per Cisco doc	8.1.0 or higher
2.12.0	Enhancement (View pull request) Update package to ECS 8.6.0.	8.1.0 or higher
2.11.0	Enhancement (View pull request) Add `udp_options` to the UDP input.	8.1.0 or higher
2.10.1	Enhancement (View pull request) Migrate the visualizations to by value in dashboards to minimize the saved object clutter and reduce time to load	8.1.0 or higher
2.10.0	Enhancement (View pull request) Allow configuration of internal/external zones	7.16.0 or higher 8.0.0 or higher
2.9.0	Enhancement (View pull request) Update package to ECS 8.5.0.	7.16.0 or higher 8.0.0 or higher
2.8.0	Enhancement (View pull request) Harmonise with pipeline with Cisco FTD.	7.16.0 or higher 8.0.0 or higher
2.7.7	Bug fix (View pull request) Remove duplicate fields.	7.16.0 or higher 8.0.0 or higher
2.7.6	Bug fix (View pull request) Remove duplicate field.	7.16.0 or higher 8.0.0 or higher
2.7.5	Bug fix (View pull request) Fix handling of 302020 event messages.	7.16.0 or higher 8.0.0 or higher
2.7.4	Enhancement (View pull request) Use ECS geo.location definition.	7.16.0 or higher 8.0.0 or higher
2.7.3	Bug fix (View pull request) Fix handling of non-canonical 113005 messages.	7.16.0 or higher 8.0.0 or higher
2.7.2	Bug fix (View pull request) Clean up grok pattern naming.	7.16.0 or higher 8.0.0 or higher
2.7.1	Bug fix (View pull request) Fix handling of some non-canonical log formats.	7.16.0 or higher 8.0.0 or higher
2.7.0	Enhancement (View pull request) Add handling of AAA operations.	7.16.0 or higher 8.0.0 or higher
2.6.0	Enhancement (View pull request) Update package to ECS 8.4.0	7.16.0 or higher 8.0.0 or higher
2.5.2	Enhancement (View pull request) Improve TCP, SSL config description and example.	7.16.0 or higher 8.0.0 or higher
2.5.1	Bug fix (View pull request) Fix handling of user parsing when SGT fields are present. Bug fix (View pull request) Fix handling of user parsing for 302013 and 302015 events.	7.16.0 or higher 8.0.0 or higher
2.5.0	Enhancement (View pull request) Update package to ECS 8.3.0.	7.16.0 or higher 8.0.0 or higher
2.4.2	Bug fix (View pull request) Map syslog priority details according to ECS Bug fix (View pull request) Extract syslog facility and severity codes from syslog priority	7.16.0 or higher 8.0.0 or higher
2.4.1	Bug fix (View pull request) Ensure invalid event.outcome does not get recorded in event	7.16.0 or higher 8.0.0 or higher
2.4.0	Enhancement (View pull request) Add TCP input with TLS support	—
2.3.0	Enhancement (View pull request) Update to ECS 8.2	7.16.0 or higher 8.0.0 or higher
2.2.2	Bug fix (View pull request) Change visualizations to use event.code instead of cisco.asa.message_id.	—
2.2.1	Enhancement (View pull request) Add documentation for multi-fields	7.16.0 or higher 8.0.0 or higher
2.2.0	Enhancement (View pull request) Add community_id processor, update 805001, 304001, 106023 and 602304 message parsing. elastic/beats#26879 Enhancement (View pull request) Add user.name field to ASA Security negotiation log line. elastic/beats#26975 Enhancement (View pull request) Change event.outcome and event.type handling to be more ECS compliant. elastic/beats#29698	7.16.0 or higher 8.0.0 or higher
2.1.0	Enhancement (View pull request) Add parsing for event code 113029-113040	7.16.0 or higher 8.0.0 or higher
2.0.1	Bug fix (View pull request) Clarify configuration option documentation	7.16.0 or higher 8.0.0 or higher
2.0.0	Enhancement (View pull request) Update to ECS 8.0	—
1.3.2	Bug fix (View pull request) Regenerate test files using the new GeoIP database	7.16.0 or higher 8.0.0 or higher
1.3.1	Bug fix (View pull request) Change test public IPs to the supported subset	—
1.3.0	Enhancement (View pull request) Add 8.0.0 version constraint	7.16.0 or higher 8.0.0 or higher
1.2.2	Enhancement (View pull request) Update Title and Description.	7.16.0 or higher
1.2.1	Bug fix (View pull request) Relax time parsing and capture group and session type in Cisco ASA module	—
1.2.0	Enhancement (View pull request) Add support for Cisco ASA SIP events	—
1.1.1	Bug fix (View pull request) Fix logic that checks for the 'forwarded' tag	—
1.1.0	Enhancement (View pull request) Update to ECS 1.12.0	—
1.0.1	Bug fix (View pull request) Adding missing ECS fields	—
1.0.0	Enhancement (View pull request) Split Cisco ASA into its own package	—

The Search AI Company

ELK Stack

Elastic Cloud

Generative AI

Search

Security

Observability

By solution

Industries

Customer spotlight

Research

Build

Learn

Connect

Cisco ASA Integration

Logs

ASA

Changelog