Transport

edit

REST clients send requests to your Elasticsearch cluster over HTTP, but the node that receives a client request cannot always handle it alone and must normally pass it on to other nodes for further processing. It does this using the transport networking layer. The transport layer is used for all internal communication between nodes within a cluster, all communication with the nodes of a remote cluster, and also by the TransportClient in the Elasticsearch Java API.

Transport settings

edit

The following settings can be configured for the internal transport that communicates over TCP. These settings also use the common network settings.

transport.port
(Static) A bind port range. Defaults to 9300-9400.
transport.publish_port
(Static) The port that other nodes in the cluster should use when communicating with this node. Useful when a cluster node is behind a proxy or firewall and the transport.port is not directly addressable from the outside. Defaults to the actual port assigned via transport.port.
transport.bind_host
(Static) The host address to bind the transport service to. Defaults to transport.host (if set) or network.bind_host.
transport.publish_host
(Static) The host address to publish for nodes in the cluster to connect to. Defaults to transport.host (if set) or network.publish_host.
transport.host
(Static) Used to set the transport.bind_host and the transport.publish_host.
transport.connect_timeout
(Static) The connect timeout for initiating a new connection (in time setting format). Defaults to 30s.
transport.compress
(Static) Set to true to enable compression (DEFLATE) between all nodes. Defaults to false.
transport.ping_schedule
(Static) Schedule a regular application-level ping message to ensure that transport connections between nodes are kept alive. Defaults to 5s in the transport client and -1 (disabled) elsewhere. It is preferable to correctly configure TCP keep-alives instead of using this feature, because TCP keep-alives apply to all kinds of long-lived connections and not just to transport connections.
transport.tcp.no_delay
(Static) Enable or disable the TCP no delay setting. Defaults to network.tcp.no_delay.
transport.tcp.keep_alive
(Static) Configures the SO_KEEPALIVE option for this socket, which determines whether it sends TCP keepalive probes. Defaults to network.tcp.keep_alive.
transport.tcp.keep_idle
(Static) Configures the TCP_KEEPIDLE option for this socket, which determines the time in seconds that a connection must be idle before starting to send TCP keepalive probes. Defaults to network.tcp.keep_idle if set, or the system default otherwise. This value cannot exceed 300 seconds. In cases where the system default is higher than 300, the value is automatically lowered to 300. Only applicable on Linux and macOS, and requires Java 11 or newer.
transport.tcp.keep_interval
(Static) Configures the TCP_KEEPINTVL option for this socket, which determines the time in seconds between sending TCP keepalive probes. Defaults to network.tcp.keep_interval if set, or the system default otherwise. This value cannot exceed 300 seconds. In cases where the system default is higher than 300, the value is automatically lowered to 300. Only applicable on Linux and macOS, and requires Java 11 or newer.
transport.tcp.keep_count
(Static) Configures the TCP_KEEPCNT option for this socket, which determines the number of unacknowledged TCP keepalive probes that may be sent on a connection before it is dropped. Defaults to network.tcp.keep_count if set, or the system default otherwise. Only applicable on Linux and macOS, and requires Java 11 or newer.
transport.tcp.reuse_address
(Static) Should an address be reused or not. Defaults to network.tcp.reuse_address.
transport.tcp.send_buffer_size
(Static) The size of the TCP send buffer (specified with size units). Defaults to network.tcp.send_buffer_size.
transport.tcp.receive_buffer_size
(Static) The size of the TCP receive buffer (specified with size units). Defaults to network.tcp.receive_buffer_size.

Transport profiles

edit

Elasticsearch allows you to bind to multiple ports on different interfaces by the use of transport profiles. See this example configuration

transport.profiles.default.port: 9300-9400
transport.profiles.default.bind_host: 10.0.0.1
transport.profiles.client.port: 9500-9600
transport.profiles.client.bind_host: 192.168.0.1
transport.profiles.dmz.port: 9700-9800
transport.profiles.dmz.bind_host: 172.16.1.2

The default profile is special. It is used as a fallback for any other profiles, if those do not have a specific configuration setting set, and is how this node connects to other nodes in the cluster.

The following parameters can be configured on each transport profile, as in the example above:

  • port: The port to which to bind.
  • bind_host: The host to which to bind.
  • publish_host: The host which is published in informational APIs.

Profiles also support all the other transport settings specified in the transport settings section, and use these as defaults. For example, transport.profiles.client.tcp.reuse_address can be explicitly configured, and defaults otherwise to transport.tcp.reuse_address.

Long-lived idle connections

edit

A transport connection between two nodes is made up of a number of long-lived TCP connections, some of which may be idle for an extended period of time. Nonetheless, Elasticsearch requires these connections to remain open, and it can disrupt the operation of your cluster if any inter-node connections are closed by an external influence such as a firewall. It is important to configure your network to preserve long-lived idle connections between Elasticsearch nodes, for instance by leaving tcp.keep_alive enabled and ensuring that the keepalive interval is shorter than any timeout that might cause idle connections to be closed, or by setting transport.ping_schedule if keepalives cannot be configured. Devices which drop connections when they reach a certain age are a common source of problems to Elasticsearch clusters, and must not be used.

Request compression

edit

By default, the transport.compress setting is false and network-level request compression is disabled between nodes in the cluster. This default normally makes sense for local cluster communication as compression has a noticeable CPU cost and local clusters tend to be set up with fast network connections between nodes.

The transport.compress setting always configures local cluster request compression and is the fallback setting for remote cluster request compression. If you want to configure remote request compression differently than local request compression, you can set it on a per-remote cluster basis using the cluster.remote.${cluster_alias}.transport.compress setting.

Response compression

edit

The compression settings do not configure compression for responses. Elasticsearch will compress a response if the inbound request was compressed—​even when compression is not enabled. Similarly, Elasticsearch will not compress a response if the inbound request was uncompressed—​even when compression is enabled.

Transport tracer

edit

The transport layer has a dedicated tracer logger which, when activated, logs incoming and out going requests. The log can be dynamically activated by setting the level of the org.elasticsearch.transport.TransportService.tracer logger to TRACE:

PUT _cluster/settings
{
   "transient" : {
      "logger.org.elasticsearch.transport.TransportService.tracer" : "TRACE"
   }
}

You can also control which actions will be traced, using a set of include and exclude wildcard patterns. By default every request will be traced except for fault detection pings:

PUT _cluster/settings
{
   "transient" : {
      "transport.tracer.include" : "*",
      "transport.tracer.exclude" : "internal:coordination/fault_detection/*"
   }
}