Function Score Query

edit

The function_score allows you to modify the score of documents that are retrieved by a query. This can be useful if, for example, a score function is computationally expensive and it is sufficient to compute the score on a filtered set of documents.

To use function_score, the user has to define a query and one or more functions, that compute a new score for each document returned by the query.

function_score can be used with only one function like this:

GET /_search
{
    "query": {
        "function_score": {
            "query": { "match_all": {} },
            "boost": "5",
            "random_score": {}, 
            "boost_mode":"multiply"
        }
    }
}

See Function Score Query for a list of supported functions.

Furthermore, several functions can be combined. In this case one can optionally choose to apply the function only if a document matches a given filtering query

GET /_search
{
    "query": {
        "function_score": {
          "query": { "match_all": {} },
          "boost": "5", 
          "functions": [
              {
                  "filter": { "match": { "test": "bar" } },
                  "random_score": {}, 
                  "weight": 23
              },
              {
                  "filter": { "match": { "test": "cat" } },
                  "weight": 42
              }
          ],
          "max_boost": 42,
          "score_mode": "max",
          "boost_mode": "multiply",
          "min_score" : 42
        }
    }
}

Boost for the whole query.

See Function Score Query for a list of supported functions.

The scores produced by the filtering query of each function do not matter.

If no filter is given with a function this is equivalent to specifying "match_all": {}

First, each document is scored by the defined functions. The parameter score_mode specifies how the computed scores are combined:

multiply

scores are multiplied (default)

sum

scores are summed

avg

scores are averaged

first

the first function that has a matching filter is applied

max

maximum score is used

min

minimum score is used

Because scores can be on different scales (for example, between 0 and 1 for decay functions but arbitrary for field_value_factor) and also because sometimes a different impact of functions on the score is desirable, the score of each function can be adjusted with a user defined weight. The weight can be defined per function in the functions array (example above) and is multiplied with the score computed by the respective function. If weight is given without any other function declaration, weight acts as a function that simply returns the weight.

In case score_mode is set to avg the individual scores will be combined by a weighted average. For example, if two functions return score 1 and 2 and their respective weights are 3 and 4, then their scores will be combined as (1*3+2*4)/(3+4) and not (1*3+2*4)/2.

The new score can be restricted to not exceed a certain limit by setting the max_boost parameter. The default for max_boost is FLT_MAX.

The newly computed score is combined with the score of the query. The parameter boost_mode defines how:

multiply

query score and function score is multiplied (default)

replace

only function score is used, the query score is ignored

sum

query score and function score are added

avg

average

max

max of query score and function score

min

min of query score and function score

By default, modifying the score does not change which documents match. To exclude documents that do not meet a certain score threshold the min_score parameter can be set to the desired score threshold.

For min_score to work, all documents returned by the query need to be scored and then filtered out one by one.

The function_score query provides several types of score functions.

Script score

edit

The script_score function allows you to wrap another query and customize the scoring of it optionally with a computation derived from other numeric field values in the doc using a script expression. Here is a simple sample:

GET /_search
{
    "query": {
        "function_score": {
            "query": {
                "match": { "message": "elasticsearch" }
            },
            "script_score" : {
                "script" : {
                  "source": "Math.log(2 + doc['likes'].value)"
                }
            }
        }
    }
}

In Elasticsearch, all document scores are positive 32-bit floating point numbers.

If the script_score function produces a score with greater precision, it is converted to the nearest 32-bit float.

Similarly, scores must be non-negative. Otherwise, Elasticsearch returns an error.

On top of the different scripting field values and expression, the _score script parameter can be used to retrieve the score based on the wrapped query.

Scripts compilation is cached for faster execution. If the script has parameters that it needs to take into account, it is preferable to reuse the same script, and provide parameters to it:

GET /_search
{
    "query": {
        "function_score": {
            "query": {
                "match": { "message": "elasticsearch" }
            },
            "script_score" : {
                "script" : {
                    "params": {
                        "a": 5,
                        "b": 1.2
                    },
                    "source": "params.a / Math.pow(params.b, doc['likes'].value)"
                }
            }
        }
    }
}

Note that unlike the custom_score query, the score of the query is multiplied with the result of the script scoring. If you wish to inhibit this, set "boost_mode": "replace"

Weight

edit

The weight score allows you to multiply the score by the provided weight. This can sometimes be desired since boost value set on specific queries gets normalized, while for this score function it does not. The number value is of type float.

"weight" : number

Random

edit

The random_score generates scores that are uniformly distributed from 0 up to but not including 1. By default, it uses the internal Lucene doc ids as a source of randomness, which is very efficient but unfortunately not reproducible since documents might be renumbered by merges.

In case you want scores to be reproducible, it is possible to provide a seed and field. The final score will then be computed based on this seed, the minimum value of field for the considered document and a salt that is computed based on the index name and shard id so that documents that have the same value but are stored in different indexes get different scores. Note that documents that are within the same shard and have the same value for field will however get the same score, so it is usually desirable to use a field that has unique values for all documents. A good default choice might be to use the _seq_no field, whose only drawback is that scores will change if the document is updated since update operations also update the value of the _seq_no field.

It was possible to set a seed without setting a field, but this has been deprecated as this requires loading fielddata on the _id field which consumes a lot of memory.

GET /_search
{
    "query": {
        "function_score": {
            "random_score": {
                "seed": 10,
                "field": "_seq_no"
            }
        }
    }
}

Field Value factor

edit

The field_value_factor function allows you to use a field from a document to influence the score. It’s similar to using the script_score function, however, it avoids the overhead of scripting. If used on a multi-valued field, only the first value of the field is used in calculations.

As an example, imagine you have a document indexed with a numeric likes field and wish to influence the score of a document with this field, an example doing so would look like:

GET /_search
{
    "query": {
        "function_score": {
            "field_value_factor": {
                "field": "likes",
                "factor": 1.2,
                "modifier": "sqrt",
                "missing": 1
            }
        }
    }
}

Which will translate into the following formula for scoring:

sqrt(1.2 * doc['likes'].value)

There are a number of options for the field_value_factor function:

field

Field to be extracted from the document.

factor

Optional factor to multiply the field value with, defaults to 1.

modifier

Modifier to apply to the field value, can be one of: none, log, log1p, log2p, ln, ln1p, ln2p, square, sqrt, or reciprocal. Defaults to none.

Modifier Meaning

none

Do not apply any multiplier to the field value

log

Take the common logarithm of the field value

log1p

Add 1 to the field value and take the common logarithm

log2p

Add 2 to the field value and take the common logarithm

ln

Take the natural logarithm of the field value

ln1p

Add 1 to the field value and take the natural logarithm

ln2p

Add 2 to the field value and take the natural logarithm

square

Square the field value (multiply it by itself)

sqrt

Take the square root of the field value

reciprocal

Reciprocate the field value, same as 1/x where x is the field’s value

missing

Value used if the document doesn’t have that field. The modifier and factor are still applied to it as though it were read from the document.

Keep in mind that taking the log() of 0, or the square root of a negative number
is an illegal operation, and an exception will be thrown. Be sure to limit the
values of the field with a range filter to avoid this, or use `log1p` and
`ln1p`.

Scores produced by the field_value_score function must be non-negative, otherwise a deprecation warning will be issued.

Decay functions

edit

Decay functions score a document with a function that decays depending on the distance of a numeric field value of the document from a user given origin. This is similar to a range query, but with smooth edges instead of boxes.

To use distance scoring on a query that has numerical fields, the user has to define an origin and a scale for each field. The origin is needed to define the “central point” from which the distance is calculated, and the scale to define the rate of decay. The decay function is specified as

"DECAY_FUNCTION": { 
    "FIELD_NAME": { 
          "origin": "11, 12",
          "scale": "2km",
          "offset": "0km",
          "decay": 0.33
    }
}

The DECAY_FUNCTION should be one of linear, exp, or gauss.

The specified field must be a numeric, date, or geo-point field.

In the above example, the field is a geo_point and origin can be provided in geo format. scale and offset must be given with a unit in this case. If your field is a date field, you can set scale and offset as days, weeks, and so on. Example:

GET /_search
{
    "query": {
        "function_score": {
            "gauss": {
                "date": {
                      "origin": "2013-09-17", 
                      "scale": "10d",
                      "offset": "5d", 
                      "decay" : 0.5 
                }
            }
        }
    }
}

The date format of the origin depends on the format defined in your mapping. If you do not define the origin, the current time is used.

The offset and decay parameters are optional.

origin

The point of origin used for calculating distance. Must be given as a number for numeric field, date for date fields and geo point for geo fields. Required for geo and numeric field. For date fields the default is now. Date math (for example now-1h) is supported for origin.

scale

Required for all types. Defines the distance from origin + offset at which the computed score will equal decay parameter. For geo fields: Can be defined as number+unit (1km, 12m,…​). Default unit is meters. For date fields: Can to be defined as a number+unit ("1h", "10d",…​). Default unit is milliseconds. For numeric field: Any number.

offset

If an offset is defined, the decay function will only compute the decay function for documents with a distance greater that the defined offset. The default is 0.

decay

The decay parameter defines how documents are scored at the distance given at scale. If no decay is defined, documents at the distance scale will be scored 0.5.

In the first example, your documents might represents hotels and contain a geo location field. You want to compute a decay function depending on how far the hotel is from a given location. You might not immediately see what scale to choose for the gauss function, but you can say something like: "At a distance of 2km from the desired location, the score should be reduced to one third." The parameter "scale" will then be adjusted automatically to assure that the score function computes a score of 0.33 for hotels that are 2km away from the desired location.

In the second example, documents with a field value between 2013-09-12 and 2013-09-22 would get a weight of 1.0 and documents which are 15 days from that date a weight of 0.5.

Supported decay functions

edit

The DECAY_FUNCTION determines the shape of the decay:

gauss

Normal decay, computed as:

Gaussian

where sigma is computed to assure that the score takes the value decay at distance scale from origin+-offset

sigma calc

See Normal decay, keyword gauss for graphs demonstrating the curve generated by the gauss function.

exp

Exponential decay, computed as:

Exponential

where again the parameter lambda is computed to assure that the score takes the value decay at distance scale from origin+-offset

lambda calc

See Exponential decay, keyword exp for graphs demonstrating the curve generated by the exp function.

linear

Linear decay, computed as:

Linear.

where again the parameter s is computed to assure that the score takes the value decay at distance scale from origin+-offset

s calc

In contrast to the normal and exponential decay, this function actually sets the score to 0 if the field value exceeds twice the user given scale value.

For single functions the three decay functions together with their parameters can be visualized like this (the field in this example called "age"):

decay 2d

Multi-values fields

edit

If a field used for computing the decay contains multiple values, per default the value closest to the origin is chosen for determining the distance. This can be changed by setting multi_value_mode.

min

Distance is the minimum distance

max

Distance is the maximum distance

avg

Distance is the average distance

sum

Distance is the sum of all distances

Example:

    "DECAY_FUNCTION": {
        "FIELD_NAME": {
              "origin": ...,
              "scale": ...
        },
        "multi_value_mode": "avg"
    }

Detailed example

edit

Suppose you are searching for a hotel in a certain town. Your budget is limited. Also, you would like the hotel to be close to the town center, so the farther the hotel is from the desired location the less likely you are to check in.

You would like the query results that match your criterion (for example, "hotel, Nancy, non-smoker") to be scored with respect to distance to the town center and also the price.

Intuitively, you would like to define the town center as the origin and maybe you are willing to walk 2km to the town center from the hotel.
In this case your origin for the location field is the town center and the scale is ~2km.

If your budget is low, you would probably prefer something cheap above something expensive. For the price field, the origin would be 0 Euros and the scale depends on how much you are willing to pay, for example 20 Euros.

In this example, the fields might be called "price" for the price of the hotel and "location" for the coordinates of this hotel.

The function for price in this case would be

"gauss": { 
    "price": {
          "origin": "0",
          "scale": "20"
    }
}

This decay function could also be linear or exp.

and for location:

"gauss": { 
    "location": {
          "origin": "11, 12",
          "scale": "2km"
    }
}

This decay function could also be linear or exp.

Suppose you want to multiply these two functions on the original score, the request would look like this:

GET /_search
{
    "query": {
        "function_score": {
          "functions": [
            {
              "gauss": {
                "price": {
                  "origin": "0",
                  "scale": "20"
                }
              }
            },
            {
              "gauss": {
                "location": {
                  "origin": "11, 12",
                  "scale": "2km"
                }
              }
            }
          ],
          "query": {
            "match": {
              "properties": "balcony"
            }
          },
          "score_mode": "multiply"
        }
    }
}

Next, we show how the computed score looks like for each of the three possible decay functions.

Normal decay, keyword gauss

edit

When choosing gauss as the decay function in the above example, the contour and surface plot of the multiplier looks like this:

cd0e18a6 e898 11e2 9b3c f0145078bd6f
ec43c928 e898 11e2 8e0d f3c4519dbd89

Suppose your original search results matches three hotels :

  • "Backback Nap"
  • "Drink n Drive"
  • "BnB Bellevue".

"Drink n Drive" is pretty far from your defined location (nearly 2 km) and is not too cheap (about 13 Euros) so it gets a low factor a factor of 0.56. "BnB Bellevue" and "Backback Nap" are both pretty close to the defined location but "BnB Bellevue" is cheaper, so it gets a multiplier of 0.86 whereas "Backpack Nap" gets a value of 0.66.

Exponential decay, keyword exp

edit

When choosing exp as the decay function in the above example, the contour and surface plot of the multiplier looks like this:

082975c0 e899 11e2 86f7 174c3a729d64
0b606884 e899 11e2 907b aefc77eefef6

Linear decay, keyword linear

edit

When choosing linear as the decay function in the above example, the contour and surface plot of the multiplier looks like this:

1775b0ca e899 11e2 9f4a 776b406305c6
19d8b1aa e899 11e2 91bc 6b0553e8d722

Supported fields for decay functions

edit

Only numeric, date, and geo-point fields are supported.

What if a field is missing?

edit

If the numeric field is missing in the document, the function will return 1.