Configure the Kafka output

edit

The Kafka output sends events to Apache Kafka.

To use this output, edit the Winlogbeat configuration file to disable the Elasticsearch output by commenting it out, and enable the Kafka output by uncommenting the Kafka section.

For Kafka version 0.10.0.0+ the message creation timestamp is set by beats and equals to the initial timestamp of the event. This affects the retention policy in Kafka: for example, if a beat event was created 2 weeks ago, the retention policy is set to 7 days and the message from beats arrives to Kafka today, it’s going to be immediately discarded since the timestamp value is before the last 7 days. It’s possible to change this behavior by setting timestamps on message arrival instead, so the message is not discarded but kept for 7 more days. To do that, please set log.message.timestamp.type to LogAppendTime (default CreateTime) in the Kafka configuration.

Example configuration:

output.kafka:
  # initial brokers for reading cluster metadata
  hosts: ["kafka1:9092", "kafka2:9092", "kafka3:9092"]

  # message topic selection + partitioning
  topic: '%{[fields.log_topic]}'
  partition.round_robin:
    reachable_only: false

  required_acks: 1
  compression: gzip
  max_message_bytes: 1000000

Events bigger than max_message_bytes will be dropped. To avoid this problem, make sure Winlogbeat does not generate events bigger than max_message_bytes.

Compatibility

edit

This output can connect to Kafka version 0.8.2.0 and later. Older versions might work as well, but are not supported.

Configuration options

edit

You can specify the following options in the kafka section of the winlogbeat.yml config file:

enabled

edit

The enabled config is a boolean setting to enable or disable the output. If set to false, the output is disabled.

The default value is true.

hosts

edit

The list of Kafka broker addresses from where to fetch the cluster metadata. The cluster metadata contain the actual Kafka brokers events are published to.

version

edit

Kafka protocol version that Winlogbeat will request when connecting. Defaults to 1.0.0.

Valid values are all kafka releases in between 0.8.2.0 and 2.6.0.

The protocol version controls the Kafka client features available to Winlogbeat; it does not prevent Winlogbeat from connecting to Kafka versions newer than the protocol version.

See Compatibility for information on supported versions.

username

edit

The username for connecting to Kafka. If username is configured, the password must be configured as well.

password

edit

The password for connecting to Kafka.

sasl.mechanism

edit

The SASL mechanism to use when connecting to Kafka. It can be one of:

  • PLAIN for SASL/PLAIN.
  • SCRAM-SHA-256 for SCRAM-SHA-256.
  • SCRAM-SHA-512 for SCRAM-SHA-512.

If sasl.mechanism is not set, PLAIN is used if username and password are provided. Otherwise, SASL authentication is disabled.

To use GSSAPI mechanism to authenticate with Kerberos, you must leave this field empty, and use the kerberos options.

topic

edit

The Kafka topic used for produced events.

You can set the topic dynamically by using a format string to access any event field. For example, this configuration uses a custom field, fields.log_topic, to set the topic for each event:

topic: '%{[fields.log_topic]}'

To learn how to add custom fields to events, see the fields option.

See the topics setting for other ways to set the topic dynamically.

topics

edit

An array of topic selector rules. Each rule specifies the topic to use for events that match the rule. During publishing, Winlogbeat sets the topic for each event based on the first matching rule in the array. Rules can contain conditionals, format string-based fields, and name mappings. If the topics setting is missing or no rule matches, the topic field is used.

Rule settings:

topic
The topic format string to use. If this string contains field references, such as %{[fields.name]}, the fields must exist, or the rule fails.
mappings
A dictionary that takes the value returned by topic and maps it to a new name.
default
The default string value to use if mappings does not find a match.
when
A condition that must succeed in order to execute the current rule. All the conditions supported by processors are also supported here.

The following example sets the topic based on whether the message field contains the specified string:

output.kafka:
  hosts: ["localhost:9092"]
  topic: "logs-%{[agent.version]}"
  topics:
    - topic: "critical-%{[agent.version]}"
      when.contains:
        message: "CRITICAL"
    - topic: "error-%{[agent.version]}"
      when.contains:
        message: "ERR"

This configuration results in topics named critical-8.5.3, error-8.5.3, and logs-8.5.3.

key

edit

Optional formatted string specifying the Kafka event key. If configured, the event key can be extracted from the event using a format string.

See the Kafka documentation for the implications of a particular choice of key; by default, the key is chosen by the Kafka cluster.

partition

edit

Kafka output broker event partitioning strategy. Must be one of random, round_robin, or hash. By default the hash partitioner is used.

random.group_events: Sets the number of events to be published to the same partition, before the partitioner selects a new partition by random. The default value is 1 meaning after each event a new partition is picked randomly.

round_robin.group_events: Sets the number of events to be published to the same partition, before the partitioner selects the next partition. The default value is 1 meaning after each event the next partition will be selected.

hash.hash: List of fields used to compute the partitioning hash value from. If no field is configured, the events key value will be used.

hash.random: Randomly distribute events if no hash or key value can be computed.

All partitioners will try to publish events to all partitions by default. If a partition’s leader becomes unreachable for the beat, the output might block. All partitioners support setting reachable_only to overwrite this behavior. If reachable_only is set to true, events will be published to available partitions only.

Publishing to a subset of available partitions potentially increases resource usage because events may become unevenly distributed.

headers

edit

A header is a key-value pair, and multiple headers can be included with the same key. Only string values are supported. These headers will be included in each produced Kafka message.

output.kafka:
  hosts: ["localhost:9092"]
  topic: "logs-%{[agent.version]}"
  headers:
    - key: "some-key"
      value: "some value"
    - key: "another-key"
      value: "another value"

client_id

edit

The configurable ClientID used for logging, debugging, and auditing purposes. The default is "beats".

codec

edit

Output codec configuration. If the codec section is missing, events will be json encoded.

See Change the output codec for more information.

metadata

edit

Kafka metadata update settings. The metadata do contain information about brokers, topics, partition, and active leaders to use for publishing.

refresh_frequency
Metadata refresh interval. Defaults to 10 minutes.
full
Strategy to use when fetching metadata, when this option is true, the client will maintain a full set of metadata for all the available topics, if the this option is set to false it will only refresh the metadata for the configured topics. The default is false.
retry.max
Total number of metadata update retries when cluster is in middle of leader election. The default is 3.
retry.backoff
Waiting time between retries during leader elections. Default is 250ms.

max_retries

edit

Winlogbeat ignores the max_retries setting and retries indefinitely.

backoff.init

edit

The number of seconds to wait before trying to republish to Kafka after a network error. After waiting backoff.init seconds, Winlogbeat tries to republish. If the attempt fails, the backoff timer is increased exponentially up to backoff.max. After a successful publish, the backoff timer is reset. The default is 1s.

backoff.max

edit

The maximum number of seconds to wait before attempting to republish to Kafka after a network error. The default is 60s.

bulk_max_size

edit

The maximum number of events to bulk in a single Kafka request. The default is 2048.

bulk_flush_frequency

edit

Duration to wait before sending bulk Kafka request. 0 is no delay. The default is 0.

timeout

edit

The number of seconds to wait for responses from the Kafka brokers before timing out. The default is 30 (seconds).

broker_timeout

edit

The maximum duration a broker will wait for number of required ACKs. The default is 10s.

channel_buffer_size

edit

Per Kafka broker number of messages buffered in output pipeline. The default is 256.

keep_alive

edit

The keep-alive period for an active network connection. If 0s, keep-alives are disabled. The default is 0 seconds.

compression

edit

Sets the output compression codec. Must be one of none, snappy, lz4 and gzip. The default is gzip.

Known issue with Azure Event Hub for Kafka

When targeting Azure Event Hub for Kafka, set compression to none as the provided codecs are not supported.

compression_level

edit

Sets the compression level used by gzip. Setting this value to 0 disables compression. The compression level must be in the range of 1 (best speed) to 9 (best compression).

Increasing the compression level will reduce the network usage but will increase the cpu usage.

The default value is 4.

max_message_bytes

edit

The maximum permitted size of JSON-encoded messages. Bigger messages will be dropped. The default value is 1000000 (bytes). This value should be equal to or less than the broker’s message.max.bytes.

required_acks

edit

The ACK reliability level required from broker. 0=no response, 1=wait for local commit, -1=wait for all replicas to commit. The default is 1.

Note: If set to 0, no ACKs are returned by Kafka. Messages might be lost silently on error.

ssl

edit

Configuration options for SSL parameters like the root CA for Kafka connections. The Kafka host keystore should be created with the -keyalg RSA argument to ensure it uses a cipher supported by Filebeat’s Kafka library. See SSL for more information.

kerberos

edit

This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Beta features are not subject to the support SLA of official GA features.

Configuration options for Kerberos authentication.

See Kerberos for more information.