HTTP Endpoint input

edit

This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Beta features are not subject to the support SLA of official GA features.

The HTTP Endpoint input initializes a listening HTTP server that collects incoming HTTP POST requests containing a JSON body. The body must be either an object or an array of objects. Any other data types will result in an HTTP 400 (Bad Request) response. For arrays, one document is created for each object in the array.

gzip encoded request bodies are supported if a Content-Encoding: gzip header is sent with the request.

This input can for example be used to receive incoming webhooks from a third-party application or service.

Multiple endpoints may be assigned to a single address and port, and the HTTP Endpoint input will resolve requests based on the URL pattern configuration. If multiple endpoints are configured on a single address they must all have the same TLS configuration, either all disabled or all enabled with identical configurations.

These are the possible response codes from the server.

HTTP Response Code Name Reason

200

OK

Returned on success.

400

Bad Request

Returned if JSON body decoding fails.

401

Unauthorized

Returned when basic auth, secret header, or HMAC validation fails.

405

Method Not Allowed

Returned if methods other than POST are used.

406

Not Acceptable

Returned if the POST request does not contain a body.

415

Unsupported Media Type

Returned if the Content-Type is not application/json. Or if Content-Encoding is present and is not gzip.

500

Internal Server Error

Returned if an I/O error occurs reading the request.

Example configurations:

Basic example:

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080

Custom response example:

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  response_code: 200
  response_body: '{"message": "success"}'
  url: "/"
  prefix: "json"

Multiple endpoints example:

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  url: "/open/"
  tags: [open]
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  url: "/admin/"
  basic_auth: true
  username: adminuser
  password: somepassword
  tags: [admin]

Disable Content-Type checks

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  content_type: ""
  prefix: "json"

Basic auth and SSL example:

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  ssl.enabled: true
  ssl.certificate: "/home/user/server.pem"
  ssl.key: "/home/user/server.key"
  ssl.verification_mode: "none"
  ssl.certificate_authority: "/home/user/ca.pem"
  basic_auth: true
  username: someuser
  password: somepassword

Authentication or checking that a specific header includes a specific value

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  secret.header: someheadername
  secret.value: secretheadertoken

Validate webhook endpoint for a specific provider using CRC

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  secret.header: someheadername
  secret.value: secretheadertoken
  crc.provider: webhookProvider
  crc.secret: secretToken

Validate a HMAC signature from a specific header

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  hmac.header: "X-Hub-Signature-256"
  hmac.key: "password123"
  hmac.type: "sha256"
  hmac.prefix: "sha256="

Preserving original event and including headers in document

filebeat.inputs:
- type: http_endpoint
  enabled: true
  listen_address: 192.168.1.1
  listen_port: 8080
  preserve_original_event: true
  include_headers: ["TestHeader"]

Configuration options

edit

The http_endpoint input supports the following configuration options plus the Common options described later.

basic_auth

edit

Enables or disables HTTP basic auth for each incoming request. If enabled then username and password will also need to be configured.

username

edit

If basic_auth is enabled, this is the username used for authentication against the HTTP listener. Requires password to also be set.

password

edit

If basic_auth is enabled, this is the password used for authentication against the HTTP listener. Requires username to also be set.

secret.header

edit

The header to check for a specific value specified by secret.value. Certain webhooks provide the possibility to include a special header and secret to identify the source.

secret.value

edit

The secret stored in the header name specified by secret.header. Certain webhooks provide the possibility to include a special header and secret to identify the source.

hmac.header

edit

The name of the header that contains the HMAC signature: X-Dropbox-Signature, X-Hub-Signature-256, etc.

hmac.key

edit

The secret key used to calculate the HMAC signature. Typically, the webhook sender provides this value.

hmac.type

edit

The hash algorithm to use for the HMAC comparison. At this time the only valid values are sha256 or sha1.

hmac.prefix

edit

The prefix for the signature. Certain webhooks prefix the HMAC signature with a value, for example sha256=.

content_type

edit

By default the input expects the incoming POST to include a Content-Type of application/json to try to enforce the incoming data to be valid JSON. In certain scenarios when the source of the request is not able to do that, it can be overwritten with another value or set to null.

response_code

edit

The HTTP response code returned upon success. Should be in the 2XX range.

response_body

edit

The response body returned upon success.

listen_address

edit

If multiple interfaces is present the listen_address can be set to control which IP address the listener binds to. Defaults to 127.0.0.1.

listen_port

edit

Which port the listener binds to. Defaults to 8000.

url

edit

This options specific which URL path to accept requests on. Defaults to /

prefix

edit

This option specifies which prefix the incoming request will be mapped to.

include_headers

edit

This options specifies a list of HTTP headers that should be copied from the incoming request and included in the document. All configured headers will always be canonicalized to match the headers of the incoming request. For example, ["content-type"] will become ["Content-Type"] when the filebeat is running.

preserve_original_event

edit

This option copies the raw unmodified body of the incoming request to the event.original field as a string before sending the event to Elasticsearch.

crc.provider

edit

This option defines the provider of the webhook that uses CRC (Challenge-Response Check) for validating the endpoint. The HTTP endpoint input is responsible for ensuring the authenticity of incoming webhook requests by generating and verifying a unique token. By specifying the crc.provider, you ensure that the system correctly handles the specific CRC validation process required by the chosen provider.

crc.secret

edit

The secret token provided by the webhook owner for the CRC validation. It is required when a crc.provider is set.

Common options

edit

The following configuration options are supported by all inputs.

enabled
edit

Use the enabled option to enable and disable inputs. By default, enabled is set to true.

tags
edit

A list of tags that Filebeat includes in the tags field of each published event. Tags make it easy to select specific events in Kibana or apply conditional filtering in Logstash. These tags will be appended to the list of tags specified in the general configuration.

Example:

filebeat.inputs:
- type: http_endpoint
  . . .
  tags: ["json"]
fields
edit

Optional fields that you can specify to add additional information to the output. For example, you might add fields that you can use for filtering log data. Fields can be scalar values, arrays, dictionaries, or any nested combination of these. By default, the fields that you specify here will be grouped under a fields sub-dictionary in the output document. To store the custom fields as top-level fields, set the fields_under_root option to true. If a duplicate field is declared in the general configuration, then its value will be overwritten by the value declared here.

filebeat.inputs:
- type: http_endpoint
  . . .
  fields:
    app_id: query_engine_12
fields_under_root
edit

If this option is set to true, the custom fields are stored as top-level fields in the output document instead of being grouped under a fields sub-dictionary. If the custom field names conflict with other field names added by Filebeat, then the custom fields overwrite the other fields.

processors
edit

A list of processors to apply to the input data.

See Processors for information about specifying processors in your config.

pipeline
edit

The ingest pipeline ID to set for the events generated by this input.

The pipeline ID can also be configured in the Elasticsearch output, but this option usually results in simpler configuration files. If the pipeline is configured both in the input and output, the option from the input is used.

keep_null
edit

If this option is set to true, fields with null values will be published in the output document. By default, keep_null is set to false.

index
edit

If present, this formatted string overrides the index for events from this input (for elasticsearch outputs), or sets the raw_index field of the event’s metadata (for other outputs). This string can only refer to the agent name and version and the event timestamp; for access to dynamic fields, use output.elasticsearch.index or a processor.

Example value: "%{[agent.name]}-myindex-%{+yyyy.MM.dd}" might expand to "filebeat-myindex-2019.11.01".

publisher_pipeline.disable_host
edit

By default, all events contain host.name. This option can be set to true to disable the addition of this field to all events. The default value is false.