A newer version is available. For the latest information, see the current release documentation.

› ›

Fortinet module

edit

Fortinet module

edit

This is a module for Fortinet logs sent in the syslog format. It supports the following devices:

firewall fileset: Supports FortiOS Firewall logs.
clientendpoint fileset: Supports FortiClient Endpoint Protection logs.
fortimail fileset: Supports FortiMail logs.
fortimanager fileset: Supports FortiManager logs.

To configure a remote syslog destination, please reference the Fortigate/FortiOS Documentation.

The syslog format choosen should be Default.

Read the quick start to learn how to configure and run modules.

Compatibility

edit

This module has been tested against FortiOS version 6.0.x and 6.2.x. Versions above this are expected to work but have not been tested.

Configure the module

edit

You can further refine the behavior of the fortinet module by specifying variable settings in the modules.d/fortinet.yml file, or overriding settings at the command line.

Variable settings

edit

Each fileset has separate variable settings for configuring the behavior of the module. If you don’t specify variable settings, the fortinet module uses the defaults.

For advanced use cases, you can also override input settings. See Override input settings.

When you specify a setting at the command line, remember to prefix the setting with the module name, for example, fortinet.firewall.var.paths instead of firewall.var.paths.

`firewall` fileset settings

edit

- module: fortinet
  firewall:
    enabled: true
    var.input: udp
    var.syslog_host: 0.0.0.0
    var.syslog_port: 9004

var.paths: An array of glob-based paths that specify where to look for the log files. All patterns supported by Go Glob are also supported here. For example, you can use wildcards to fetch all files from a predefined level of subdirectories: /path/to/log/*/*.log. This fetches all .log files from the subfolders of /path/to/log. It does not fetch log files from the /path/to/log folder itself. If this setting is left empty, Filebeat will choose log paths based on your operating system.

Time zone support

edit

This module parses logs that don’t contain time zone information. For these logs, Filebeat reads the local time zone and uses it when parsing to convert the timestamp to UTC. The time zone to be used for parsing is included in the event in the event.timezone field.

To disable this conversion, the event.timezone field can be removed with the drop_fields processor.

If logs are originated from systems or applications with a different time zone to the local one, the event.timezone field can be overwritten with the original time zone using the add_fields processor.

See Processors for information about specifying processors in your config.

var.input: The input to use, can be either the value tcp, udp or file.
var.syslog_host: The interface to listen to all syslog traffic. Defaults to localhost. Set to 0.0.0.0 to bind to all available interfaces.
var.syslog_port: The port to listen for syslog traffic. Defaults to 9004.
var.tags: A list of tags to include in events. Including forwarded indicates that the events did not originate on this host and causes host.name to not be added to events. Defaults to [fortinet-firewall, forwarded].

`clientendpoint` fileset settings

edit

This functionality is in technical preview and may be changed or removed in a future release. Elastic will work to fix any issues, but features in technical preview are not subject to the support SLA of official GA features.

This was converted from RSA NetWitness log parser XML "forticlientendpoint" device revision 0.

var.input: The input from which messages are read. One of file, tcp or udp. Defaults to udp.
var.syslog_host: The address to listen to UDP or TCP based syslog traffic. Defaults to localhost. Set to 0.0.0.0 to bind to all available interfaces.
var.syslog_port: The port to listen for syslog traffic. Defaults to 9510

Ports below 1024 require Filebeat to run as root.

var.tz_offset: By default, datetimes in the logs will be interpreted as relative to the timezone configured in the host where Filebeat is running. If ingesting logs from a host on a different timezone, use this field to set the timezone offset so that datetimes are correctly parsed. Valid values are in the form ±HH:mm, for example, -07:00 for UTC-7.
var.rsa_fields: Flag to control the addition of non-ECS fields to the event. Defaults to true, which causes both ECS and custom fields under rsa to be added.
var.keep_raw_fields: Flag to control the addition of the raw parser fields to the event. This fields will be found under rsa.raw. The default is false.

`fortimail` fileset settings

edit

This was converted from RSA NetWitness log parser XML "fortinetfortimail" device revision 131.

var.input: The input from which messages are read. One of file, tcp or udp. Defaults to udp.
var.syslog_host: The address to listen to UDP or TCP based syslog traffic. Defaults to localhost. Set to 0.0.0.0 to bind to all available interfaces.
var.syslog_port: The port to listen for syslog traffic. Defaults to 9529

Ports below 1024 require Filebeat to run as root.

var.tz_offset: By default, datetimes in the logs will be interpreted as relative to the timezone configured in the host where Filebeat is running. If ingesting logs from a host on a different timezone, use this field to set the timezone offset so that datetimes are correctly parsed. Valid values are in the form ±HH:mm, for example, -07:00 for UTC-7.
var.rsa_fields: Flag to control the addition of non-ECS fields to the event. Defaults to true, which causes both ECS and custom fields under rsa to be added.
var.keep_raw_fields: Flag to control the addition of the raw parser fields to the event. This fields will be found under rsa.raw. The default is false.

`fortimanager` fileset settings

edit

This was converted from RSA NetWitness log parser XML "fortinetmgr" device revision 134.

var.input: The input from which messages are read. One of file, tcp or udp. Defaults to udp.
var.syslog_host: The address to listen to UDP or TCP based syslog traffic. Defaults to localhost. Set to 0.0.0.0 to bind to all available interfaces.
var.syslog_port: The port to listen for syslog traffic. Defaults to 9530

Ports below 1024 require Filebeat to run as root.

var.tz_offset: By default, datetimes in the logs will be interpreted as relative to the timezone configured in the host where Filebeat is running. If ingesting logs from a host on a different timezone, use this field to set the timezone offset so that datetimes are correctly parsed. Valid values are in the form ±HH:mm, for example, -07:00 for UTC-7.
var.rsa_fields: Flag to control the addition of non-ECS fields to the event. Defaults to true, which causes both ECS and custom fields under rsa to be added.
var.keep_raw_fields: Flag to control the addition of the raw parser fields to the event. This fields will be found under rsa.raw. The default is false.

Fortinet ECS fields

edit

This is a list of FortiOS fields that are mapped to ECS.

Fortinet Fields	ECS Fields
action	event.action
agent	user_agent.original
app	network.application
appcat	rule.category
applist	rule.ruleset
catdesc	rule.category
ccertissuer	tls.client_issuer
collectedemail	source.user.email
comment	rule.description
daddr	destination.address
devid	observer.serial_number
dir	network.direction
direction	network.direction
dst_host	destination.address
dstcollectedemail	destination.user.email
dst_int	observer.egress.interface.name
dstintf	observer.egress.interface.name
dstip	destination.ip
dstmac	destination.mac
dstname	destination.address
dst_port	destination.port
dstport	destination.port
dstunauthuser	destination.user.name
dtype	vulnerability.category
duration	event.duration
errorcode	error.code
event_id	event.id
eventid	event.id
eventtime	event.start
eventtype	event.action
file	file.name
filename	file.name
filesize	file.size
filetype	file.extension
filehash	file.hash.crc32
from	source.user.email
group	source.user.group
hostname	url.domain
infectedfilename	file.name
infectedfilesize	file.size
infectedfiletype	file.extension
ipaddr	dns.resolved_ip
level	log.level
locip	source.ip
locport	source.port
logdesc	rule.description
logid	event.code
matchfilename	file.name
matchfiletype	file.extension
msg	message
error_num	error.code
policyid	rule.id
policy_id	rule.id
policyname	rule.name
policytype	rule.ruleset
poluuid	rule.uuid
profile	rule.ruleset
proto	network.iana_number
qclass	dns.question.class
qname	dns.question.name
qtype	dns.question.type
rcvdbyte	source.bytes
rcvdpkt	source.packets
recipient	destination.user.email
ref	event.reference
remip	destination.ip
remport	destination.port
saddr	source.address
scertcname	tls.client.server_name
scertissuer	tls.server.issuer
sender	source.user.email
sentbyte	source.bytes
sentpkt	source.packets
service	network.protocol
sess_duration	event.duration
srcdomain	source.domain
srcintf	observer.ingress.interface.name
srcip	source.ip
source_mac	source.mac
srcmac	source.mac
srcport	source.port
tranip	destination.nat.ip
tranport	destination.nat.port
transip	source.nat.ip
transport	source.nat.port
tz	event.timezone
unauthuser	source.user.name
url	url.path
user	source.user.name
xid	dns.id

Fields

edit

For a description of each field in the module, see the exported fields section.

« F5 module Google Cloud module »

Fortinet module

Fortinet module

Compatibility

Configure the module

Variable settings

firewall fileset settings

Time zone support

clientendpoint fileset settings

fortimail fileset settings

fortimanager fileset settings

Fortinet ECS fields

Fields

`firewall` fileset settings

`clientendpoint` fileset settings

`fortimail` fileset settings

`fortimanager` fileset settings