Network Settings

edit

There are several modules within a Node that use network based configuration, for example, the transport and http modules. Node level network settings allows to set common settings that will be shared among all network based modules (unless explicitly overridden in each module).

The network.bind_host setting allows to control the host different network components will bind on. By default, the bind host will be anyLocalAddress (typically 0.0.0.0 or ::0).

The network.publish_host setting allows to control the host the node will publish itself within the cluster so other nodes will be able to connect to it. Of course, this can’t be the anyLocalAddress, and by default, it will be the first non loopback address (if possible), or the local address.

The network.host setting is a simple setting to automatically set both network.bind_host and network.publish_host to the same host value.

Both settings allows to be configured with either explicit host address or host name. The settings also accept logical setting values explained in the following table:

Logical Host Setting Value Description

_local_

Will be resolved to the local ip address.

_non_loopback_

The first non loopback address.

_non_loopback:ipv4_

The first non loopback IPv4 address.

_non_loopback:ipv6_

The first non loopback IPv6 address.

_[networkInterface]_

Resolves to the ip address of the provided network interface. For example _en0_.

_[networkInterface]:ipv4_

Resolves to the ipv4 address of the provided network interface. For example _en0:ipv4_.

_[networkInterface]:ipv6_

Resolves to the ipv6 address of the provided network interface. For example _en0:ipv6_.

When the cloud-aws plugin is installed, the following are also allowed as valid network host settings:

EC2 Host Value Description

_ec2:privateIpv4_

The private IP address (ipv4) of the machine.

_ec2:privateDns_

The private host of the machine.

_ec2:publicIpv4_

The public IP address (ipv4) of the machine.

_ec2:publicDns_

The public host of the machine.

_ec2_

Less verbose option for the private ip address.

_ec2:privateIp_

Less verbose option for the private ip address.

_ec2:publicIp_

Less verbose option for the public ip address.

TCP Settings

edit

Any component that uses TCP (like the HTTP, Transport and Memcached) share the following allowed settings:

Setting Description

network.tcp.no_delay

Enable or disable tcp no delay setting. Defaults to true. [1.4.0.Beta1] Added in 1.4.0.Beta1. Can be set to default to not be set at all.

network.tcp.keep_alive

Enable or disable tcp keep alive. Defaults to true. [1.4.0.Beta1] Added in 1.4.0.Beta1. Can be set to default to not be set at all .

network.tcp.reuse_address

Should an address be reused or not. Defaults to true on non-windows machines.

network.tcp.send_buffer_size

The size of the tcp send buffer size (in size setting format). By default not explicitly set.

network.tcp.receive_buffer_size

The size of the tcp receive buffer size (in size setting format). By default not explicitly set.