metricbeat.reference.yml

edit

The following reference file is available with your Metricbeat installation. It shows all non-deprecated Metricbeat options. You can copy from this file and paste configurations into the metricbeat.yml file to customize it.

For rpm and deb, you’ll find the reference configuration file at /etc/metricbeat/metricbeat.reference.yml. Under Docker, it’s located at /usr/share/metricbeat/metricbeat.reference.yml. For mac and win, look in the archive that you just extracted.

The contents of the file are included here for your convenience.

########################## Metricbeat Configuration ###########################

# This file is a full configuration example documenting all non-deprecated
# options in comments. For a shorter configuration example, that contains only
# the most common options, please see metricbeat.yml in the same directory.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/metricbeat/index.html

#============================  Config Reloading ===============================

# Config reloading allows to dynamically load modules. Each file which is
# monitored must contain one or multiple modules as a list.
metricbeat.config.modules:

  # Glob pattern for configuration reloading
  path: ${path.config}/conf.d/*.yml

  # Period on which files under path should be checked for changes
  reload.period: 10s

  # Set to true to enable config reloading
  reload.enabled: false

# Maximum amount of time to randomly delay the start of a metricset. Use 0 to
# disable startup delay.
metricbeat.max_start_delay: 10s

#============================== Autodiscover ===================================

# Autodiscover allows you to detect changes in the system and spawn new modules
# as they happen.

#metricbeat.autodiscover:
  # List of enabled autodiscover providers
#  providers:
#    - type: docker
#      templates:
#        - condition:
#            equals.docker.container.image: etcd
#          config:
#            - module: etcd
#              metricsets: ["leader", "self", "store"]
#              period: 10s
#              hosts: ["${host}:2379"]

#==========================  Modules configuration ============================
metricbeat.modules:

#------------------------------- System Module -------------------------------
- module: system
  metricsets:
    - cpu             # CPU usage
    - load            # CPU load averages
    - memory          # Memory usage
    - network         # Network IO
    - process         # Per process metrics
    - process_summary # Process summary
    - uptime          # System Uptime
    #- core           # Per CPU core usage
    #- diskio         # Disk IO
    #- filesystem     # File system usage for each mountpoint
    #- fsstat         # File system summary metrics
    #- raid           # Raid
    #- socket         # Sockets and connection info (linux only)
  enabled: true
  period: 10s
  processes: ['.*']

  # Configure the metric types that are included by these metricsets.
  cpu.metrics:  ["percentages"]  # The other available options are normalized_percentages and ticks.
  core.metrics: ["percentages"]  # The other available option is ticks.

  # A list of filesystem types to ignore. The filesystem metricset will not
  # collect data from filesystems matching any of the specified types, and
  # fsstats will not include data from these filesystems in its summary stats.
  # If not set, types associated to virtual filesystems are automatically
  # added when this information is available in the system (e.g. the list of
  # `nodev` types in `/proc/filesystem`).
  #filesystem.ignore_types: []

  # These options allow you to filter out all processes that are not
  # in the top N by CPU or memory, in order to reduce the number of documents created.
  # If both the `by_cpu` and `by_memory` options are used, the union of the two sets
  # is included.
  #process.include_top_n:

    # Set to false to disable this feature and include all processes
    #enabled: true

    # How many processes to include from the top by CPU. The processes are sorted
    # by the `system.process.cpu.total.pct` field.
    #by_cpu: 0

    # How many processes to include from the top by memory. The processes are sorted
    # by the `system.process.memory.rss.bytes` field.
    #by_memory: 0

  # If false, cmdline of a process is not cached.
  #process.cmdline.cache.enabled: true

  # Enable collection of cgroup metrics from processes on Linux.
  #process.cgroups.enabled: true

  # A list of regular expressions used to whitelist environment variables
  # reported with the process metricset's events. Defaults to empty.
  #process.env.whitelist: []

  # Include the cumulative CPU tick values with the process metrics. Defaults
  # to false.
  #process.include_cpu_ticks: false

  # Raid mount point to monitor
  #raid.mount_point: '/'

  # Configure reverse DNS lookup on remote IP addresses in the socket metricset.
  #socket.reverse_lookup.enabled: false
  #socket.reverse_lookup.success_ttl: 60s
  #socket.reverse_lookup.failure_ttl: 60s

  # Diskio configurations
  #diskio.include_devices: []

#------------------------------ Aerospike Module -----------------------------
- module: aerospike
  metricsets: ["namespace"]
  enabled: true
  period: 10s
  hosts: ["localhost:3000"]

#------------------------------- Apache Module -------------------------------
- module: apache
  metricsets: ["status"]
  period: 10s
  enabled: true

  # Apache hosts
  hosts: ["http://127.0.0.1"]

  # Path to server status. Default server-status
  #server_status_path: "server-status"

  # Username of hosts.  Empty by default
  #username: username

  # Password of hosts. Empty by default
  #password: password

#-------------------------------- Ceph Module --------------------------------
- module: ceph
  metricsets: ["cluster_disk", "cluster_health", "monitor_health", "pool_disk", "osd_tree"]
  period: 10s
  hosts: ["localhost:5000"]
  enabled: true

#------------------------------ Couchbase Module -----------------------------
- module: couchbase
  metricsets: ["bucket", "cluster", "node"]
  period: 10s
  hosts: ["localhost:8091"]
  enabled: true

#------------------------------- Docker Module -------------------------------
- module: docker
  metricsets:
    - "container"
    - "cpu"
    - "diskio"
    - "healthcheck"
    - "info"
    #- "image"
    - "memory"
    - "network"
  hosts: ["unix:///var/run/docker.sock"]
  period: 10s
  enabled: true

  # If set to true, replace dots in labels with `_`.
  #labels.dedot: false

  # To connect to Docker over TLS you must specify a client and CA certificate.
  #ssl:
    #certificate_authority: "/etc/pki/root/ca.pem"
    #certificate:           "/etc/pki/client/cert.pem"
    #key:                   "/etc/pki/client/cert.key"

#----------------------------- Dropwizard Module -----------------------------
- module: dropwizard
  metricsets: ["collector"]
  period: 10s
  hosts: ["localhost:8080"]
  metrics_path: /metrics/metrics
  namespace: example
  enabled: true

#---------------------------- Elasticsearch Module ---------------------------
- module: elasticsearch
  metricsets:
    - node
    - node_stats
    #- index
    #- index_recovery
    #- index_summary
    #- shard
    #- ml_job
  period: 10s
  hosts: ["localhost:9200"]
  #username: "elastic"
  #password: "changeme"
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Set to false to fetch all entries
  #index_recovery.active_only: true

#----------------------------- envoyproxy Module -----------------------------
- module: envoyproxy
  metricsets: ["server"]
  period: 10s
  hosts: ["localhost:9901"]

#-------------------------------- Etcd Module --------------------------------
- module: etcd
  metricsets: ["leader", "self", "store"]
  period: 10s
  hosts: ["localhost:2379"]

#------------------------------- Golang Module -------------------------------
- module: golang
  #metricsets:
  #  - expvar
  #  - heap
  period: 10s
  hosts: ["localhost:6060"]
  heap.path: "/debug/vars"
  expvar:
    namespace: "example"
    path: "/debug/vars"

#------------------------------ Graphite Module ------------------------------
- module: graphite
  metricsets: ["server"]
  enabled: true

  # Host address to listen on. Default localhost.
  #host: localhost

  # Listening port. Default 2003.
  #port: 2003

  # Protocol to listen on. This can be udp or tcp. Default udp.
  #protocol: "udp"

  # Receive buffer size in bytes
  #receive_buffer_size: 1024

  #templates:
  #  - filter: "test.*.bash.*" # This would match metrics like test.localhost.bash.stats
  #    namespace: "test"
  #    template: ".host.shell.metric*" # test.localhost.bash.stats would become metric=stats and tags host=localhost,shell=bash
  #    delimiter: "_"


#------------------------------- HAProxy Module ------------------------------
- module: haproxy
  metricsets: ["info", "stat"]
  period: 10s
  hosts: ["tcp://127.0.0.1:14567"]
  enabled: true

#-------------------------------- HTTP Module --------------------------------
- module: http
  #metricsets:
  #  - json
  period: 10s
  hosts: ["localhost:80"]
  namespace: "json_namespace"
  path: "/"
  #body: ""
  #method: "GET"
  #username: "user"
  #password: "secret"
  #request.enabled: false
  #response.enabled: false
  #json.is_array: false
  #dedot.enabled: false

- module: http
  #metricsets:
  #  - server
  host: "localhost"
  port: "8080"
  enabled: false
  #paths:
  #  - path: "/foo"
  #    namespace: "foo"
  #    fields: # added to the the response in root. overwrites existing fields
  #      key: "value"

#------------------------------- Jolokia Module ------------------------------
- module: jolokia
  #metricsets: ["jmx"]
  period: 10s
  hosts: ["localhost"]
  namespace: "metrics"
  #path: "/jolokia/?ignoreErrors=true&canonicalNaming=false"
  #username: "user"
  #password: "secret"
  jmx.mappings:
    #- mbean: 'java.lang:type=Runtime'
    #  attributes:
    #    - attr: Uptime
    #      field: uptime
    #- mbean: 'java.lang:type=Memory'
    #  attributes:
    #    - attr: HeapMemoryUsage
    #      field: memory.heap_usage
    #    - attr: NonHeapMemoryUsage
    #      field: memory.non_heap_usage
    # GC Metrics - this depends on what is available on your JVM
    #- mbean: 'java.lang:type=GarbageCollector,name=ConcurrentMarkSweep'
    #  attributes:
    #    - attr: CollectionTime
    #      field: gc.cms_collection_time
    #    - attr: CollectionCount
    #      field: gc.cms_collection_count

  jmx.application:
  jmx.instance:

#-------------------------------- Kafka Module -------------------------------
- module: kafka
  metricsets: ["consumergroup", "partition"]
  period: 10s
  hosts: ["localhost:9092"]
  enabled: true

  #client_id: metricbeat
  #retries: 3
  #backoff: 250ms

  # List of Topics to query metadata for. If empty, all topics will be queried.
  #topics: []

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # SASL authentication
  #username: ""
  #password: ""

#------------------------------- Kibana Module -------------------------------
- module: kibana
  metricsets: ["status"]
  period: 10s
  hosts: ["localhost:5601"]
  basepath: ""
  enabled: true

#----------------------------- Kubernetes Module -----------------------------
# Node metrics, from kubelet:
- module: kubernetes
  metricsets:
    - container
    - node
    - pod
    - system
    - volume
  period: 10s
  hosts: ["localhost:10255"]
  enabled: true
  #bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
  #ssl.certificate_authorities:
  #  - /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt
  #ssl.certificate: "/etc/pki/client/cert.pem"
  #ssl.key: "/etc/pki/client/cert.key"

  # Enriching parameters:
  add_metadata: true
  in_cluster: true
  # When used outside the cluster:
  #host: node_name
  #kube_config: ~/.kube/config

# State metrics from kube-state-metrics service:
- module: kubernetes
  enabled: true
  metricsets:
    - state_node
    - state_deployment
    - state_replicaset
    - state_statefulset
    - state_pod
    - state_container
  period: 10s
  hosts: ["kube-state-metrics:8080"]

  # Enriching parameters:
  add_metadata: true
  in_cluster: true
  # When used outside the cluster:
  #host: node_name
  #kube_config: ~/.kube/config

# Kubernetes events
- module: kubernetes
  enabled: true
  metricsets:
    - event

# Kubernetes API server
- module: kubernetes
  enabled: true
  metricsets:
    - apiserver
  hosts: ["https://${KUBERNETES_SERVICE_HOST}:${KUBERNETES_SERVICE_PORT}"]

#--------------------------------- kvm Module --------------------------------
- module: kvm
  metricsets: ["dommemstat"]
  enabled: true
  period: 10s
  hosts: ["unix:///var/run/libvirt/libvirt-sock"]
  # For remote hosts, setup network access in libvirtd.conf
  # and use the tcp scheme:
  # hosts: [ "tcp://<host>:16509" ]

  # Timeout to connect to Libvirt server
  #timeout: 1s

#------------------------------ Logstash Module ------------------------------
- module: logstash
  metricsets: ["node", "node_stats"]
  enabled: true
  period: 10s
  hosts: ["localhost:9600"]

#------------------------------ Memcached Module -----------------------------
- module: memcached
  metricsets: ["stats"]
  period: 10s
  hosts: ["localhost:11211"]
  enabled: true

#------------------------------- MongoDB Module ------------------------------
- module: mongodb
  metricsets: ["dbstats", "status"]
  period: 10s
  enabled: true

  # The hosts must be passed as MongoDB URLs in the format:
  # [mongodb://][user:pass@]host[:port].
  # The username and password can also be set using the respective configuration
  # options. The credentials in the URL take precedence over the username and
  # password configuration options.
  hosts: ["localhost:27017"]

  # Optional SSL. By default is off.
  #ssl.enabled: true

  # Mode of verification of server certificate ('none' or 'full')
  #ssl.verification_mode: 'full'

  # List of root certificates for TLS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Username to use when connecting to MongoDB. Empty by default.
  #username: user

  # Password to use when connecting to MongoDB. Empty by default.
  #password: pass

#-------------------------------- Munin Module -------------------------------
- module: munin
  metricsets: ["node"]
  enabled: true
  period: 10s
  hosts: ["localhost:4949"]
  node.namespace: node

#-------------------------------- MySQL Module -------------------------------
- module: mysql
  metricsets:
    - "status"
  #  - "galera_status"
  period: 10s

  # Host DSN should be defined as "user:pass@tcp(127.0.0.1:3306)/"
  # The username and password can either be set in the DSN or using the username
  # and password config options. Those specified in the DSN take precedence.
  hosts: ["root:secret@tcp(127.0.0.1:3306)/"]

  # Username of hosts. Empty by default.
  #username: root

  # Password of hosts. Empty by default.
  #password: secret

  # By setting raw to true, all raw fields from the status metricset will be added to the event.
  #raw: false

#-------------------------------- Nginx Module -------------------------------
- module: nginx
  metricsets: ["stubstatus"]
  enabled: true
  period: 10s

  # Nginx hosts
  hosts: ["http://127.0.0.1"]

  # Path to server status. Default server-status
  server_status_path: "server-status"

#------------------------------- PHP_FPM Module ------------------------------
- module: php_fpm
  metricsets: ["pool"]
  enabled: true
  period: 10s
  status_path: "/status"
  hosts: ["localhost:8080"]

#----------------------------- PostgreSQL Module -----------------------------
- module: postgresql
  enabled: true
  metricsets:
    # Stats about every PostgreSQL database
    - database

    # Stats about the background writer process's activity
    - bgwriter

    # Stats about every PostgreSQL process
    - activity

  period: 10s

  # The host must be passed as PostgreSQL URL. Example:
  # postgres://localhost:5432?sslmode=disable
  # The available parameters are documented here:
  # https://godoc.org/github.com/lib/pq#hdr-Connection_String_Parameters
  hosts: ["postgres://localhost:5432"]

  # Username to use when connecting to PostgreSQL. Empty by default.
  #username: user

  # Password to use when connecting to PostgreSQL. Empty by default.
  #password: pass

#----------------------------- Prometheus Module -----------------------------
- module: prometheus
  metricsets: ["stats"]
  enabled: true
  period: 10s
  hosts: ["localhost:9090"]
  #metrics_path: /metrics
  #namespace: example

- module: prometheus
  metricsets: ["collector"]
  enabled: true
  period: 10s
  hosts: ["localhost:9090"]
  #metrics_path: /metrics
  #namespace: example

  # This can be used for service account based authorization:
  #  bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
  #ssl.certificate_authorities:
  #  - /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt

#------------------------------ RabbitMQ Module ------------------------------
- module: rabbitmq
  metricsets: ["node", "queue", "connection"]
  enabled: true
  period: 10s
  hosts: ["localhost:15672"]

  # Management path prefix, if `management.path_prefix` is set in RabbitMQ
  # configuration, it has to be set to the same value.
  #management_path_prefix: ""

  #username: guest
  #password: guest

#-------------------------------- Redis Module -------------------------------
- module: redis
  metricsets: ["info", "keyspace"]
  enabled: true
  period: 10s

  # Redis hosts
  hosts: ["127.0.0.1:6379"]

  # Timeout after which time a metricset should return an error
  # Timeout is by default defined as period, as a fetch of a metricset
  # should never take longer then period, as otherwise calls can pile up.
  #timeout: 1s

  # Optional fields to be added to each event
  #fields:
  #  datacenter: west

  # Network type to be used for redis connection. Default: tcp
  #network: tcp

  # Max number of concurrent connections. Default: 10
  #maxconn: 10

  # Filters can be used to reduce the number of fields sent.
  #processors:
  #  - include_fields:
  #      fields: ["beat", "metricset", "redis.info.stats"]

  # Redis AUTH password. Empty by default.
  #password: foobared

#------------------------------- traefik Module ------------------------------
- module: traefik
  metricsets: ["health"]
  period: 10s
  hosts: ["localhost:8080"]

#-------------------------------- uwsgi Module -------------------------------
- module: uwsgi
  metricsets: ["status"]
  enable: true
  period: 10s
  hosts: ["tcp://127.0.0.1:9191"]

#------------------------------- vSphere Module ------------------------------
- module: vsphere
  enabled: true
  metricsets: ["datastore", "host", "virtualmachine"]
  period: 10s
  hosts: ["https://localhost/sdk"]

  username: "user"
  password: "password"
  # If insecure is true, don't verify the server's certificate chain
  insecure: false
  # Get custom fields when using virtualmachine metric set. Default false.
  # get_custom_fields: false

#------------------------------- Windows Module ------------------------------
- module: windows
  metricsets: ["perfmon"]
  enabled: true
  period: 10s
  perfmon.ignore_non_existent_counters: true
  perfmon.counters:
  #  - instance_label: processor.name
  #    instance_name: total
  #    measurement_label: processor.time.total.pct
  #    query: '\Processor Information(_Total)\% Processor Time'

- module: windows
  metricsets: ["service"]
  enabled: true
  period: 60s

#------------------------------ ZooKeeper Module -----------------------------
- module: zookeeper
  enabled: true
  metricsets: ["mntr"]
  period: 10s
  hosts: ["localhost:2181"]



#================================ General ======================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
#  env: staging

# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a fields
# sub-dictionary. Default is false.
#fields_under_root: false

# Internal queue configuration for buffering events to be published.
#queue:
  # Queue type by name (default 'mem')
  # The memory queue will present all available events (up to the outputs
  # bulk_max_size) to the output, the moment the output is ready to server
  # another batch of events.
  #mem:
    # Max number of events the queue can buffer.
    #events: 4096

    # Hints the minimum number of events stored in the queue,
    # before providing a batch of events to the outputs.
    # The default value is set to 2048.
    # A value of 0 ensures events are immediately available
    # to be sent to the outputs.
    #flush.min_events: 2048

    # Maximum duration after which events are available to the outputs,
    # if the number of events stored in the queue is < min_flush_events.
    #flush.timeout: 1s

  # The spool queue will store events in a local spool file, before
  # forwarding the events to the outputs.
  #
  # Beta: spooling to disk is currently a beta feature. Use with care.
  #
  # The spool file is a circular buffer, which blocks once the file/buffer is full.
  # Events are put into a write buffer and flushed once the write buffer
  # is full or the flush_timeout is triggered.
  # Once ACKed by the output, events are removed immediately from the queue,
  # making space for new events to be persisted.
  #spool:
    # The file namespace configures the file path and the file creation settings.
    # Once the file exists, the `size`, `page_size` and `prealloc` settings
    # will have no more effect.
    #file:
      # Location of spool file. The default value is ${path.data}/spool.dat.
      #path: "${path.data}/spool.dat"

      # Configure file permissions if file is created. The default value is 0600.
      #permissions: 0600

      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
      #size: 100MiB

      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
      #page_size: 4KiB

      # If prealloc is set, the required space for the file is reserved using
      # truncate. The default value is true.
      #prealloc: true

    # Spool writer settings
    # Events are serialized into a write buffer. The write buffer is flushed if:
    # - The buffer limit has been reached.
    # - The configured limit of buffered events is reached.
    # - The flush timeout is triggered.
    #write:
      # Sets the write buffer size.
      #buffer_size: 1MiB

      # Maximum duration after which events are flushed, if the write buffer
      # is not full yet. The default value is 1s.
      #flush.timeout: 1s

      # Number of maximum buffered events. The write buffer is flushed once the
      # limit is reached.
      #flush.events: 16384

      # Configure the on-disk event encoding. The encoding can be changed
      # between restarts.
      # Valid encodings are: json, ubjson, and cbor.
      #codec: cbor
    #read:
      # Reader flush timeout, waiting for more events to become available, so
      # to fill a complete batch, as required by the outputs.
      # If flush_timeout is 0, all available events are forwarded to the
      # outputs immediately.
      # The default value is 0s.
      #flush.timeout: 0s

# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:

#================================ Processors ===================================

# Processors are used to reduce the number of fields in the exported event or to
# enhance the event with external metadata. This section defines a list of
# processors that are applied one by one and the first one receives the initial
# event:
#
#   event -> filter1 -> event1 -> filter2 ->event2 ...
#
# The supported processors are drop_fields, drop_event, include_fields, and
# add_cloud_metadata.
#
# For example, you can use the following processors to keep the fields that
# contain CPU load percentages, but remove the fields that contain CPU ticks
# values:
#
#processors:
#- include_fields:
#    fields: ["cpu"]
#- drop_fields:
#    fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#processors:
#- drop_event:
#    when:
#       equals:
#           http.code: 200
#
# The following example renames the field a to b:
#
#processors:
#- rename:
#    fields:
#       - from: "a"
#         to: "b"
#
# The following example tokenizes the string into fields:
#
#processors:
#- dissect:
#    tokenizer: "%{key1} - %{key2}"
#    field: "message"
#    target_prefix: "dissect"
#
# The following example enriches each event with metadata from the cloud
# provider about the host machine. It works on EC2, GCE, DigitalOcean,
# Tencent Cloud, and Alibaba Cloud.
#
#processors:
#- add_cloud_metadata: ~
#
# The following example enriches each event with the machine's local time zone
# offset from UTC.
#
#processors:
#- add_locale:
#    format: offset
#
# The following example enriches each event with docker metadata, it matches
# given fields to an existing container id and adds info from that container:
#
#processors:
#- add_docker_metadata:
#    host: "unix:///var/run/docker.sock"
#    match_fields: ["system.process.cgroup.id"]
#    match_pids: ["process.pid", "process.ppid"]
#    match_source: true
#    match_source_index: 4
#    match_short_id: false
#    cleanup_timeout: 60
#    # To connect to Docker over TLS you must specify a client and CA certificate.
#    #ssl:
#    #  certificate_authority: "/etc/pki/root/ca.pem"
#    #  certificate:           "/etc/pki/client/cert.pem"
#    #  key:                   "/etc/pki/client/cert.key"
#
# The following example enriches each event with docker metadata, it matches
# container id from log path available in `source` field (by default it expects
# it to be /var/lib/docker/containers/*/*.log).
#
#processors:
#- add_docker_metadata: ~
#
# The following example enriches each event with host metadata.
#
#processors:
#- add_host_metadata:
#   netinfo.enabled: false
#

#============================= Elastic Cloud ==================================

# These settings simplify using metricbeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

#================================ Outputs ======================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output -------------------------------
output.elasticsearch:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Configure escaping html symbols in strings.
  #escape_html: true

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the url with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Number of workers per Elasticsearch host.
  #worker: 1

  # Optional index name. The default is "metricbeat" plus date
  # and generates [metricbeat-]YYYY.MM.DD keys.
  # In case you modify this pattern you must update setup.template.name and setup.template.pattern accordingly.
  #index: "metricbeat-%{[beat.version]}-%{+yyyy.MM.dd}"

  # Optional ingest node pipeline. By default no pipeline will be used.
  #pipeline: ""

  # Optional HTTP Path
  #path: "/elasticsearch"

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s

  # Configure http request timeout before failing a request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never


#----------------------------- Logstash output ---------------------------------
#output.logstash:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Number of workers per Logstash host.
  #worker: 1

  # Set gzip compression level.
  #compression_level: 3

  # Configure escaping html symbols in strings.
  #escape_html: true

  # Optional maximum time to live for a connection to Logstash, after which the
  # connection will be re-established.  A value of `0s` (the default) will
  # disable this feature.
  #
  # Not yet supported for async connections (i.e. with the "pipelining" option set)
  #ttl: 30s

  # Optional load balance the events between the Logstash hosts. Default is false.
  #loadbalance: false

  # Number of batches to be sent asynchronously to Logstash while processing
  # new batches.
  #pipelining: 2

  # If enabled only a subset of events in a batch of events is transferred per
  # transaction.  The number of events to be sent increases up to `bulk_max_size`
  # if no error is encountered.
  #slow_start: false

  # The number of seconds to wait before trying to reconnect to Logstash
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Logstash after a network error. The default is 60s.
  #backoff.max: 60s

  # Optional index name. The default index name is set to metricbeat
  # in all lowercase.
  #index: 'metricbeat'

  # SOCKS5 proxy server URL
  #proxy_url: socks5://user:password@socks5-server:2233

  # Resolve names locally when using a proxy server. Defaults to false.
  #proxy_use_local_resolver: false

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat and Winlogbeat, ignore the max_retries setting
  # and retry until all events are published.  Set max_retries to a value less
  # than 0 to retry until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Logstash request. The
  # default is 2048.
  #bulk_max_size: 2048

  # The number of seconds to wait for responses from the Logstash server before
  # timing out. The default is 30s.
  #timeout: 30s

#------------------------------- Kafka output ----------------------------------
#output.kafka:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The list of Kafka broker addresses from where to fetch the cluster metadata.
  # The cluster metadata contain the actual Kafka brokers events are published
  # to.
  #hosts: ["localhost:9092"]

  # The Kafka topic used for produced events. The setting can be a format string
  # using any event field. To set the topic from document type use `%{[type]}`.
  #topic: beats

  # The Kafka event key setting. Use format string to create unique event key.
  # By default no event key will be generated.
  #key: ''

  # The Kafka event partitioning strategy. Default hashing strategy is `hash`
  # using the `output.kafka.key` setting or randomly distributes events if
  # `output.kafka.key` is not configured.
  #partition.hash:
    # If enabled, events will only be published to partitions with reachable
    # leaders. Default is false.
    #reachable_only: false

    # Configure alternative event field names used to compute the hash value.
    # If empty `output.kafka.key` setting will be used.
    # Default value is empty list.
    #hash: []

  # Authentication details. Password is required if username is set.
  #username: ''
  #password: ''

  # Kafka version metricbeat is assumed to run against. Defaults to the "1.0.0".
  #version: '1.0.0'

  # Configure JSON encoding
  #codec.json:
    # Pretty print json event
    #pretty: false

    # Configure escaping html symbols in strings.
    #escape_html: true

  # Metadata update configuration. Metadata do contain leader information
  # deciding which broker to use when publishing.
  #metadata:
    # Max metadata request retry attempts when cluster is in middle of leader
    # election. Defaults to 3 retries.
    #retry.max: 3

    # Waiting time between retries during leader elections. Default is 250ms.
    #retry.backoff: 250ms

    # Refresh metadata interval. Defaults to every 10 minutes.
    #refresh_frequency: 10m

  # The number of concurrent load-balanced Kafka output workers.
  #worker: 1

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published.  Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Kafka request. The default
  # is 2048.
  #bulk_max_size: 2048

  # The number of seconds to wait for responses from the Kafka brokers before
  # timing out. The default is 30s.
  #timeout: 30s

  # The maximum duration a broker will wait for number of required ACKs. The
  # default is 10s.
  #broker_timeout: 10s

  # The number of messages buffered for each Kafka broker. The default is 256.
  #channel_buffer_size: 256

  # The keep-alive period for an active network connection. If 0s, keep-alives
  # are disabled. The default is 0 seconds.
  #keep_alive: 0

  # Sets the output compression codec. Must be one of none, snappy and gzip. The
  # default is gzip.
  #compression: gzip

  # Set the compression level. Currently only gzip provides a compression level
  # between 0 and 9. The default value is chosen by the compression algorithm.
  #compression_level: 4

  # The maximum permitted size of JSON-encoded messages. Bigger messages will be
  # dropped. The default value is 1000000 (bytes). This value should be equal to
  # or less than the broker's message.max.bytes.
  #max_message_bytes: 1000000

  # The ACK reliability level required from broker. 0=no response, 1=wait for
  # local commit, -1=wait for all replicas to commit. The default is 1.  Note:
  # If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
  # on error.
  #required_acks: 1

  # The configurable ClientID used for logging, debugging, and auditing
  # purposes.  The default is "beats".
  #client_id: beats

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#------------------------------- Redis output ----------------------------------
#output.redis:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty print json event
    #pretty: false

    # Configure escaping html symbols in strings.
    #escape_html: true

  # The list of Redis servers to connect to. If load balancing is enabled, the
  # events are distributed to the servers in the list. If one server becomes
  # unreachable, the events are distributed to the reachable servers only.
  #hosts: ["localhost:6379"]

  # The Redis port to use if hosts does not contain a port number. The default
  # is 6379.
  #port: 6379

  # The name of the Redis list or channel the events are published to. The
  # default is metricbeat.
  #key: metricbeat

  # The password to authenticate with. The default is no authentication.
  #password:

  # The Redis database number where the events are published. The default is 0.
  #db: 0

  # The Redis data type to use for publishing events. If the data type is list,
  # the Redis RPUSH command is used. If the data type is channel, the Redis
  # PUBLISH command is used. The default value is list.
  #datatype: list

  # The number of workers to use for each host configured to publish events to
  # Redis. Use this setting along with the loadbalance option. For example, if
  # you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
  # host).
  #worker: 1

  # If set to true and multiple hosts or workers are configured, the output
  # plugin load balances published events onto all Redis hosts. If set to false,
  # the output plugin sends all events to only one host (determined at random)
  # and will switch to another host if the currently selected one becomes
  # unreachable. The default value is true.
  #loadbalance: true

  # The Redis connection timeout in seconds. The default is 5 seconds.
  #timeout: 5s

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published. Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The number of seconds to wait before trying to reconnect to Redis
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Redis after a network error. The default is 60s.
  #backoff.max: 60s

  # The maximum number of events to bulk in a single Redis request or pipeline.
  # The default is 2048.
  #bulk_max_size: 2048

  # The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
  # value must be a URL with a scheme of socks5://.
  #proxy_url:

  # This option determines whether Redis hostnames are resolved locally when
  # using a proxy. The default value is false, which means that name resolution
  # occurs on the proxy server.
  #proxy_use_local_resolver: false

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#------------------------------- File output -----------------------------------
#output.file:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty print json event
    #pretty: false

    # Configure escaping html symbols in strings.
    #escape_html: true

  # Path to the directory where to save the generated files. The option is
  # mandatory.
  #path: "/tmp/metricbeat"

  # Name of the generated files. The default is `metricbeat` and it generates
  # files: `metricbeat`, `metricbeat.1`, `metricbeat.2`, etc.
  #filename: metricbeat

  # Maximum size in kilobytes of each file. When this size is reached, and on
  # every metricbeat restart, the files are rotated. The default value is 10240
  # kB.
  #rotate_every_kb: 10000

  # Maximum number of files under path. When this number of files is reached,
  # the oldest file is deleted and the rest are shifted from last to first. The
  # default is 7 files.
  #number_of_files: 7

  # Permissions to use for file creation. The default is 0600.
  #permissions: 0600


#----------------------------- Console output ---------------------------------
#output.console:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty print json event
    #pretty: false

    # Configure escaping html symbols in strings.
    #escape_html: true

#================================= Paths ======================================

# The home path for the metricbeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
#path.home:

# The configuration path for the metricbeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
#path.config: ${path.home}

# The data path for the metricbeat installation. This is the default base path
# for all the files in which metricbeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
#path.data: ${path.home}/data

# The logs path for a metricbeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
#path.logs: ${path.home}/logs

#================================ Keystore ==========================================
# Location of the Keystore containing the keys and their sensitive values.
#keystore.path: "${path.config}/beats.keystore"

#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards are disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The directory from where to read the dashboards. The default is the `kibana`
# folder in the home path.
#setup.dashboards.directory: ${path.home}/kibana

# The URL from where to download the dashboards archive. It is used instead of
# the directory if it has a value.
#setup.dashboards.url:

# The file archive (zip file) from where to read the dashboards. It is used instead
# of the directory when it has a value.
#setup.dashboards.file:

# In case the archive contains the dashboards from multiple Beats, this lets you
# select which one to load. You can load all the dashboards in the archive by
# setting this to the empty string.
#setup.dashboards.beat: metricbeat

# The name of the Kibana index to use for setting the configuration. Default is ".kibana"
#setup.dashboards.kibana_index: .kibana

# The Elasticsearch index name. This overwrites the index name defined in the
# dashboards and index pattern. Example: testbeat-*
#setup.dashboards.index:

# Always use the Kibana API for loading the dashboards instead of autodetecting
# how to install the dashboards by first querying Elasticsearch.
#setup.dashboards.always_kibana: false

# If true and Kibana is not reachable at the time when dashboards are loaded,
# it will retry to reconnect to Kibana instead of exiting with an error.
#setup.dashboards.retry.enabled: false

# Duration interval between Kibana connection retries.
#setup.dashboards.retry.interval: 1s

# Maximum number of retries before exiting with an error, 0 for unlimited retrying.
#setup.dashboards.retry.maximum: 0


#============================== Template =====================================

# A template is used to set the mapping in Elasticsearch
# By default template loading is enabled and the template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones.

# Set to false to disable template loading.
#setup.template.enabled: true

# Template name. By default the template name is "metricbeat-%{[beat.version]}"
# The template name and pattern has to be set in case the elasticsearch index pattern is modified.
#setup.template.name: "metricbeat-%{[beat.version]}"

# Template pattern. By default the template pattern is "-%{[beat.version]}-*" to apply to the default index settings.
# The first part is the version of the beat and then -* is used to match all daily indices.
# The template name and pattern has to be set in case the elasticsearch index pattern is modified.
#setup.template.pattern: "metricbeat-%{[beat.version]}-*"

# Path to fields.yml file to generate the template
#setup.template.fields: "${path.config}/fields.yml"

# A list of fields to be added to the template and Kibana index pattern. Also
# specify setup.template.overwrite: true to overwrite the existing template.
# This setting is experimental.
#setup.template.append_fields:
#- name: field_name
#  type: field_type

# Enable json template loading. If this is enabled, the fields.yml is ignored.
#setup.template.json.enabled: false

# Path to the json template file
#setup.template.json.path: "${path.config}/template.json"

# Name under which the template is stored in Elasticsearch
#setup.template.json.name: ""

# Overwrite existing template
#setup.template.overwrite: false

# Elasticsearch template settings
setup.template.settings:

  # A dictionary of settings to place into the settings.index dictionary
  # of the Elasticsearch template. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
  #index:
    #number_of_shards: 1
    #codec: best_compression
    #number_of_routing_shards: 30

  # A dictionary of settings for the _source field. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
  #_source:
    #enabled: false

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Optional HTTP Path
  #path: ""

  # Use SSL settings for HTTPS. Default is true.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []



#================================ Logging ======================================
# There are four options for the log output: file, stderr, syslog, eventlog
# The file output is the default.

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: info

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are "beat", "publish", "service"
# Multiple selectors can be chained.
#logging.selectors: [ ]

# Send all logging output to syslog. The default is false.
#logging.to_syslog: false

# Send all logging output to Windows Event Logs. The default is false.
#logging.to_eventlog: false

# If enabled, metricbeat periodically logs its internal metrics that have changed
# in the last period. For each metric that changed, the delta from the value at
# the beginning of the period is logged. Also, the total values for
# all non-zero internal metrics are logged on shutdown. The default is true.
#logging.metrics.enabled: true

# The period after which to log the internal metrics. The default is 30s.
#logging.metrics.period: 30s

# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/metricbeat

  # The name of the files where the logs are written to.
  #name: metricbeat

  # Configure log file size limit. If limit is reached, log file will be
  # automatically rotated
  #rotateeverybytes: 10485760 # = 10MB

  # Number of rotated log files to keep. Oldest files will be deleted first.
  #keepfiles: 7

  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600

# Set to true to log messages in json format.
#logging.json: false


#============================== Xpack Monitoring =====================================
# metricbeat can export internal metrics to a central Elasticsearch monitoring cluster.
# This requires xpack monitoring to be enabled in Elasticsearch.
# The reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#xpack.monitoring.enabled: false

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well. Any setting that is not set is
# automatically inherited from the Elasticsearch output configuration, so if you
# have the Elasticsearch output configured, you can simply uncomment the
# following line, and leave the rest commented out.
#xpack.monitoring.elasticsearch:

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  #hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "beats_system"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the url with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s

  # Configure http request timeout before failing an request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  #metrics.period: 10s
  #state.period: 1m

#================================ HTTP Endpoint ======================================
# Each beat can expose internal metrics through a HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be access through http://localhost:5066/stats . For pretty JSON output
# append ?pretty to the URL.

# Defines if the HTTP endpoint is enabled.
#http.enabled: false

# The HTTP endpoint will bind to this hostname or IP address. It is recommended to use only localhost.
#http.host: localhost

# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066

#============================= Process Security ================================

# Enable or disable seccomp system call filtering on Linux. Default is enabled.
#seccomp.enabled: true